Test convoyeur

TekBot-Robotics-Challenge·2025-Team-The_Winners-Docs·electonic/testfinal/Kicad/Test_Convoyeur/Test_convoyeur.kicad_pcb

Test convoyeur PCB layout, top view — open source ESP8266 board by TekBot-Robotics-Challenge

About the Test convoyeur PCB

Test convoyeur is an open source ESP8266 PCB design by TekBot-Robotics-Challenge, published on GitHub. It is a 2-layer board measuring 82.6 × 82.3 mm, with 47 components from 26 distinct parts.

Its main chip is the ESP8266-01_ESP-01, from the ESP8266 family. Other key parts include the LM358, AMS1117CD-3.3 and ATmega328-P. By type, the board carries 17 resistors, 8 capacitors, 7 connectors, 5 diodes, 4 ICs and 2 switches.

Main components on the Test convoyeur

Test convoyeur bill of materials (BOM)

47 components, 26 distinct parts.

QtyPartRefs
1
LM358
U1
1
AMS1117CD-3.3
U2
1
ESP8266-01_ESP-01
U3
1
ATmega328-P
U4
1
NMOS
Q1
1
Crystal
Y1
1
Prog_connector
J1
1
Connect_TCS34725
J2
1
5V_power_Pins
J3
1
Batt_connector
J4
1
Diode_Laser_1
J5
1
Diode_Laser_2
J6
1
Motor_driver TB6600
J7
2
10k
RV1, RV2
2
SW_Push
SW1, SW2
5
LED
D1, D2, D3, D4, D5
1
100nF
C1
2
22pF
C2, C4
1
1µF
C3
1
100µF
C5
Show 6 more
QtyPartRefs
2
470µF
C6, C7
1
100n
C8
5
180
R1, R14, R15, R16, R17
9
10k
R2, R4, R6, R7, R8, R9, R10, R11 +1
2
LDR07
R3, R5
1
4.7k
R13

Test convoyeur design files

The KiCad project lives in the TekBot-Robotics-Challenge/2025-Team-The_Winners-Docs repository on GitHub; these links point at the commit this page was built from.

Test convoyeur: common questions

What microcontroller does the Test convoyeur use?

The Test convoyeur is built around the ESP8266-01_ESP-01, from the ESP8266 family.

How big is the Test convoyeur PCB?

The Test convoyeur measures 82.6 × 82.3 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Test convoyeur?

47 components, from 26 distinct parts. The full bill of materials is listed on this page.

Where can I download the Test convoyeur design files?

From the TekBot-Robotics-Challenge/2025-Team-The_Winners-Docs repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Test convoyeur design in my own project?

The repository has no license, so all rights stay with TekBot-Robotics-Challenge. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Test convoyeur without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP8266 firmware against it before you order a PCB.

More boards in 2025-Team-The_Winners-Docs

Similar boards