Soldered-Dasduino-CONNECTPLUS-hardware design

test-gh-syncer2·Soldered-Dasduino-CONNECTPLUS-hardware-design·CAD/V1.1.1/Dasduino_CONNECTPLUS.kicad_pcb

Soldered-Dasduino-CONNECTPLUS-hardware design PCB layout, top view — open source ESP32 board by test-gh-syncer2

About the Soldered-Dasduino-CONNECTPLUS-hardware design PCB

Soldered-Dasduino-CONNECTPLUS-hardware design is an open source ESP32 PCB design by test-gh-syncer2, published on GitHub under the TAPR-OHL-1.0 license. It is a 2-layer board measuring 25.9 × 63 mm, with 51 components from 31 distinct parts.

Its main chip is the ESP32-WROVER, from the ESP32 family. Other key parts include the CH340C, TPS7A2633DRVR and TP4056M. By type, the board carries 16 resistors, 11 capacitors, 6 diodes, 5 relays, 4 ICs and 3 transistors.

From the project

Hardware design, BOM, gerbers, 3D files and pinout for Dasduino-CONNECTPLUS designed by Soldered.

Find XXXXXXXX on our [web store](https://solde.red/ .

All Soldered hardware is designed in KiCAD, and repositories are organised in the following way:

- CAD folder - contains KiCAD files (Schematics, Board, Panel Board), organised by version. Change log lists all changes between different versions. - OUTPUTS - contains useful files, such as Bill of Materials (BOM), PDF of schematics, 3D .step file of the board and gerber files, organised by version.

Main components on the Soldered-Dasduino-CONNECTPLUS-hardware design

Soldered-Dasduino-CONNECTPLUS-hardware design bill of materials (BOM)

51 components, 31 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
CH340C
U1
1
ESP32-WROVER
U2
1
TPS7A2633DRVR
U3
1
TP4056M
U4
1
PMOS-SOT-23-3
Q1
2
NPN-SOT-23-3
Q2, Q3
1
1206FUSE-500MA
1206FUSE-500mA
F1
2
HOLE_3.2MM
HOLE_3.2mm
H1, H3
1
SMD-JUMPER-CONNECTED_TRACE_SLODERMASK
JP1
1
U262-161N-4BVC11
K1
1
easyC-SMD
K2
1
JST-2PIN-SMD
JST-2pin-SMD
K3
2
HEADER_MALE_15X1
K4, K5
2
YTSA007A0151803B
SW1, SW2
1
white
D1
1
blue
D2
1
purple
D3
1
WS2812B-2020
D4
1
schottky diode
D5
1
red
D6
Show 11 more
QtyPartRefs
1
10UF
10uF
C1
2
1UF
1uF
C2, C5
3
0.1UF
0.1uF
C3, C4, C6
4
2.2UF
2.2uF
C7, C8, C9, C10
1
100NF
100nF
C11
5
10K
10k
R1, R10, R11, R12, R13
2
5.1K
5.1k
R2, R3
3
1k
R4, R5, R17
4
2K2
2k2
R6, R7, R8, R15
1
100K
100k
R9
1
3k
R14

Soldered-Dasduino-CONNECTPLUS-hardware design design files

The KiCad project lives in the test-gh-syncer2/Soldered-Dasduino-CONNECTPLUS-hardware-design repository on GitHub; these links point at the commit this page was built from.

Soldered-Dasduino-CONNECTPLUS-hardware design: common questions

What microcontroller does the Soldered-Dasduino-CONNECTPLUS-hardware design use?

The Soldered-Dasduino-CONNECTPLUS-hardware design is built around the ESP32-WROVER, from the ESP32 family.

How big is the Soldered-Dasduino-CONNECTPLUS-hardware design PCB?

The Soldered-Dasduino-CONNECTPLUS-hardware design measures 25.9 × 63 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Soldered-Dasduino-CONNECTPLUS-hardware design?

51 components, from 31 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Soldered-Dasduino-CONNECTPLUS-hardware design design files?

From the test-gh-syncer2/Soldered-Dasduino-CONNECTPLUS-hardware-design repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Soldered-Dasduino-CONNECTPLUS-hardware design design in my own project?

Yes, under the terms of its TAPR-OHL-1.0 license, which test-gh-syncer2 chose for the repository.

Can I test firmware for the Soldered-Dasduino-CONNECTPLUS-hardware design without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

Similar boards