HardLabs

BionicHD64180S

tgtakaoka·retro-bionic·schematics/hd64180s/bionic-hd64180s.kicad_pcb

BionicHD64180S PCB layout, top view — open source board by tgtakaoka

About the BionicHD64180S PCB

BionicHD64180S is an open source PCB design by tgtakaoka, published on GitHub under the Custom license license. It is a 2-layer board measuring 25.4 × 68.6 mm, with 13 components from 10 distinct parts.

Other key parts include the HD64180SH, 11AA010-I/TT and 74AHCT157. By type, the board carries 4 capacitors, 3 ICs, 3 resistors, 2 connectors and 1 diode.

It belongs with the retro computing designs in this gallery.

From the project

Modern platform to run retro CPUs

Run real vintage CPUs on a modern Cortex-M7 — with a debugger, assembler and disassembler built in.

- CPUs — every target supported and planned, with the variants each detects - Hardware — the board stack, signal naming and the awkward chips - 3.3 V base — planned second base board, its keying and what it unlocks - Debugger — full command reference - Build & run — toolchain, flashing, serial ports - Samples — the programs and how to run them - Demos — recorded terminal sessions for 20 CPUs

BionicHD64180S, from the project README
From the project README

Main components on the BionicHD64180S

HD64180SH11AA010-I/TT74AHCT157

BionicHD64180S bill of materials (BOM)

13 components, 10 distinct parts.

QtyPartRefs
1
HD64180SH
U1
1
11AA010-I/TT
U2
1
74AHCT157
U3
1
Bionic-P135
J1
1
Bionic-P245
J2
1
CSL1901UW1
D1
3
0.1u
C1, C3, C4
1
22u
C2
1
1.6k
R1
2
10k
R2, R3

BionicHD64180S design files

The KiCad project lives in the tgtakaoka/retro-bionic repository on GitHub; these links point at the commit this page was built from.

BionicHD64180S: common questions

How big is the BionicHD64180S PCB?

The BionicHD64180S measures 25.4 × 68.6 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the BionicHD64180S?

13 components, from 10 distinct parts. The full bill of materials is listed on this page.

Where can I download the BionicHD64180S design files?

From the tgtakaoka/retro-bionic repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the BionicHD64180S design in my own project?

It is published under Custom license, which limits how it may be reused; read the license before building on it.

More boards in retro-bionic

Similar boards