HardLabs

BionicHD6120

tgtakaoka·retro-bionic·schematics/hd6120/bionic-hd6120.kicad_pcb

BionicHD6120 PCB layout, top view — open source board by tgtakaoka

About the BionicHD6120 PCB

BionicHD6120 is an open source PCB design by tgtakaoka, published on GitHub under the Custom license license. It is a 2-layer board measuring 25.4 × 68.6 mm, with 13 components from 11 distinct parts.

Other key parts include the HD6120, 11AA010-I/TT and 74LS05. By type, the board carries 4 resistors, 3 ICs, 3 capacitors, 2 connectors and 1 diode.

It belongs with the retro computing designs in this gallery.

From the project

Modern platform to run retro CPUs

Run real vintage CPUs on a modern Cortex-M7 — with a debugger, assembler and disassembler built in.

- CPUs — every target supported and planned, with the variants each detects - Hardware — the board stack, signal naming and the awkward chips - 3.3 V base — planned second base board, its keying and what it unlocks - Debugger — full command reference - Build & run — toolchain, flashing, serial ports - Samples — the programs and how to run them - Demos — recorded terminal sessions for 20 CPUs

BionicHD6120, from the project README
From the project README

Main components on the BionicHD6120

HD612011AA010-I/TT74LS05

BionicHD6120 bill of materials (BOM)

13 components, 11 distinct parts.

QtyPartRefs
1
HD6120
U1
1
11AA010-I/TT
U2
1
74LS05
U3
1
Bionic-P135
J1
1
Bionic-P245
J2
1
CSL1901UW1
D1
2
0.1u
C1, C3
1
22u
C2
1
1.9k
R1
1
1.6k
R2
2
10k
R3, R4

BionicHD6120 design files

The KiCad project lives in the tgtakaoka/retro-bionic repository on GitHub; these links point at the commit this page was built from.

BionicHD6120: common questions

How big is the BionicHD6120 PCB?

The BionicHD6120 measures 25.4 × 68.6 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the BionicHD6120?

13 components, from 11 distinct parts. The full bill of materials is listed on this page.

Where can I download the BionicHD6120 design files?

From the tgtakaoka/retro-bionic repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the BionicHD6120 design in my own project?

It is published under Custom license, which limits how it may be reused; read the license before building on it.

More boards in retro-bionic

Similar boards