BionicZ180F
About the BionicZ180F PCB
BionicZ180F is an open source PCB design by tgtakaoka, published on GitHub under the Custom license license. It is a 2-layer board measuring 25.4 × 68.6 mm, with 11 components from 10 distinct parts.
Other key parts include the Z80180FSC, 11AA010-I/TT and 74AHCT157. By type, the board carries 3 ICs, 3 resistors, 2 connectors, 2 capacitors and 1 diode.
It belongs with the retro computing designs in this gallery.
From the project
Modern platform to run retro CPUs
Run real vintage CPUs on a modern Cortex-M7 — with a debugger, assembler and disassembler built in.
- CPUs — every target supported and planned, with the variants each detects - Hardware — the board stack, signal naming and the awkward chips - 3.3 V base — planned second base board, its keying and what it unlocks - Debugger — full command reference - Build & run — toolchain, flashing, serial ports - Samples — the programs and how to run them - Demos — recorded terminal sessions for 20 CPUs
Main components on the BionicZ180F
BionicZ180F bill of materials (BOM)
11 components, 10 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | Z80180FSC | PQFP-80_14x20mm_P0.8mm | U1 |
| 1 | 11AA010-I/TT | SOT-23_MC_MCH-M | U2 |
| 1 | 74AHCT157 | PW16-M | U3 |
| 1 | Bionic-P135 | Bionic-P135_SMT | J1 |
| 1 | Bionic-P245 | Bionic-P245_SMT | J2 |
| 1 | CSL1901UW1 | LED_CSL1901UW1_ROM-M | D1 |
| 1 | 0.1u | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C1 |
| 1 | 22u | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C2 |
| 1 | 1.6k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1 |
| 2 | 10k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R2, R3 |
BionicZ180F design files
The KiCad project lives in the tgtakaoka/retro-bionic repository on GitHub; these links point at the commit this page was built from.
BionicZ180F: common questions
How big is the BionicZ180F PCB?
The BionicZ180F measures 25.4 × 68.6 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the BionicZ180F?
11 components, from 10 distinct parts. The full bill of materials is listed on this page.
Where can I download the BionicZ180F design files?
From the tgtakaoka/retro-bionic repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the BionicZ180F design in my own project?
It is published under Custom license, which limits how it may be reused; read the license before building on it.
More boards in retro-bionic
BionicTMS9900
30.5 × 88.9 mm35 parts4LCustom license6
NXPBionicBase Teensy 4.1
96.5 × 96.5 mm34 parts2LCustom license6
BionicP8080
25.4 × 68.6 mm27 parts2LCustom license6
BionicMezzanine
96.5 × 80 mm22 parts2LCustom license6
Bionic tms9980
25.4 × 68.6 mm21 parts2LCustom license6
BionicF3850 DC/DC
25.4 × 68.6 mm16 parts2LCustom license6
Bionic tms9981
25.4 × 68.6 mm16 parts2LCustom license6
BionicHD64180S
25.4 × 68.6 mm13 parts2LCustom license6
BionicHD6120
25.4 × 68.6 mm13 parts2LCustom license6
BionicMC68HC08AZ0
25.4 × 68.6 mm12 parts2LCustom license6
BionicKL5C80A12
25.4 × 68.6 mm10 parts2LCustom license6
Similar boards
OpenTendo
Redherring32
196.3 × 118.7 mm93 parts2LTAPR-OHL-1.0850
MCL86jr
MicroCoreLabs
56.1 × 57.1 mm66 parts4LNo license532
24pin flex interposer
Wren6991
29 × 32 mm3 parts2LNo license508
Sram dev board
50 × 50 mm12 parts2LNo license508
TRS-80 Color Computer 3
baldengineer
280 × 155.3 mm204 parts2LCC-BY-4.0442
Commodore Plus 4
284.7 × 158.9 mm212 parts2LCC-BY-4.0442