BionicMC68HC08AZ0

tgtakaoka·retro-bionic·schematics/mc68hc08az0/bionic-mc68hc08az0.kicad_pcb

BionicMC68HC08AZ0 PCB layout, top view — open source board by tgtakaoka

About the BionicMC68HC08AZ0 PCB

BionicMC68HC08AZ0 is an open source PCB design by tgtakaoka, published on GitHub under the Custom license license. It is a 2-layer board measuring 25.4 × 68.6 mm, with 12 components from 8 distinct parts.

Other key parts include the MC68HC08AZ0 and 11AA010-I/TT. By type, the board carries 6 capacitors, 2 ICs, 2 connectors, 1 diode and 1 resistor.

It belongs with the retro computing designs in this gallery.

From the project

Modern platform to run retro CPUs

Run real vintage CPUs on a modern Cortex-M7 — with a debugger, assembler and disassembler built in.

- CPUs — every target supported and planned, with the variants each detects - Hardware — the board stack, signal naming and the awkward chips - 3.3 V base — planned second base board, its keying and what it unlocks - Debugger — full command reference - Build & run — toolchain, flashing, serial ports - Samples — the programs and how to run them - Demos — recorded terminal sessions for 20 CPUs

BionicMC68HC08AZ0, from the project README — From the project README

Main components on the BionicMC68HC08AZ0

MC68HC08AZ0 11AA010-I/TT

BionicMC68HC08AZ0 bill of materials (BOM)

12 components, 8 distinct parts.

Qty	Part	Footprint	Refs
1	MC68HC08AZ0	LQFP-100_14x14mm_P0.5mm	U1
1	11AA010-I/TT	SOT-23_MC_MCH-M	U2
1	Bionic-P135	Bionic-P135_SMT	J1
1	Bionic-P245	Bionic-P245_SMT	J2
1	CSL1901UW1	LED_CSL1901UW1_ROM-M	D1
5	0.1u	C_0603_1608Metric_Pad1.08x0.95mm_HandSolder	C1, C3, C4, C5, C6
1	22u	C_0603_1608Metric_Pad1.08x0.95mm_HandSolder	C2
1	1.6k	R_0603_1608Metric_Pad0.98x0.95mm_HandSolder	R1

BionicMC68HC08AZ0 design files

The KiCad project lives in the tgtakaoka/retro-bionic repository on GitHub; these links point at the commit this page was built from.

BionicMC68HC08AZ0: common questions

How big is the BionicMC68HC08AZ0 PCB?

The BionicMC68HC08AZ0 measures 25.4 × 68.6 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the BionicMC68HC08AZ0?

12 components, from 8 distinct parts. The full bill of materials is listed on this page.

Where can I download the BionicMC68HC08AZ0 design files?

From the tgtakaoka/retro-bionic repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the BionicMC68HC08AZ0 design in my own project?

It is published under Custom license, which limits how it may be reused; read the license before building on it.

More boards in retro-bionic

Similar boards