BionicKL5C80A12

tgtakaoka·retro-bionic·schematics/kl5c80a12/bionic-kl5c80a12.kicad_pcb

BionicKL5C80A12 PCB layout, top view — open source board by tgtakaoka

About the BionicKL5C80A12 PCB

BionicKL5C80A12 is an open source PCB design by tgtakaoka, published on GitHub under the Custom license license. It is a 2-layer board measuring 25.4 × 68.6 mm, with 10 components from 9 distinct parts.

Other key parts include the KL5C80A12, 11AA010-I/TT and 74ACT157. By type, the board carries 3 ICs, 3 capacitors, 2 connectors, 1 diode and 1 resistor.

It belongs with the retro computing designs in this gallery.

From the project

Modern platform to run retro CPUs

Run real vintage CPUs on a modern Cortex-M7 — with a debugger, assembler and disassembler built in.

- CPUs — every target supported and planned, with the variants each detects - Hardware — the board stack, signal naming and the awkward chips - 3.3 V base — planned second base board, its keying and what it unlocks - Debugger — full command reference - Build & run — toolchain, flashing, serial ports - Samples — the programs and how to run them - Demos — recorded terminal sessions for 20 CPUs

BionicKL5C80A12, from the project README
From the project README

Main components on the BionicKL5C80A12

KL5C80A1211AA010-I/TT74ACT157

BionicKL5C80A12 bill of materials (BOM)

10 components, 9 distinct parts.

QtyPartRefs
1
KL5C80A12
U1
1
11AA010-I/TT
U2
1
74ACT157
U3
1
Bionic-P135
J1
1
Bionic-P245
J2
1
CSL1901UW1
D1
2
0.1u
C1, C3
1
22u
C2
1
1.6k
R1

BionicKL5C80A12 design files

The KiCad project lives in the tgtakaoka/retro-bionic repository on GitHub; these links point at the commit this page was built from.

BionicKL5C80A12: common questions

How big is the BionicKL5C80A12 PCB?

The BionicKL5C80A12 measures 25.4 × 68.6 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the BionicKL5C80A12?

10 components, from 9 distinct parts. The full bill of materials is listed on this page.

Where can I download the BionicKL5C80A12 design files?

From the tgtakaoka/retro-bionic repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the BionicKL5C80A12 design in my own project?

It is published under Custom license, which limits how it may be reused; read the license before building on it.

More boards in retro-bionic

Similar boards