Bluetooth beacon pcbs
TheCacophonyProject·bluetooth-beacon-pcbs·esp32-beacon-receiver/esp32-beacon-receiver.kicad_pcb
About the Bluetooth beacon pcbs PCB
Bluetooth beacon pcbs is an open source ESP32 PCB design by TheCacophonyProject, published on GitHub under the GPL-3.0 license. It is a 2-layer board measuring 74.5 × 47 mm, with 80 components from 39 distinct parts.
Its main chip is the ESP32-WROOM-32, from the ESP32 family. Other key parts include the PCF8563T, CH340C, TPS54331 and MAX98357. By type, the board carries 31 capacitors, 18 resistors, 7 diodes, 6 ICs, 5 connectors and 4 transistors.
It belongs with the iot & wireless designs in this gallery.
Main components on the Bluetooth beacon pcbs
Bluetooth beacon pcbs bill of materials (BOM)
80 components, 39 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | PCF8563T | SOIC-8_3.9x4.9mm_P1.27mm | U1 |
| 1 | CH340C | SOIC-16_3.9x9.9mm_P1.27mm | U2 |
| 1 | ESP32-WROOM-32 | ESP32-WROOM-32 | U3 |
| 2 | TPS54331 | SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.29x3mm | U4, U5 |
| 1 | MAX98357 | TQFN-16-1EP_3x3mm_P0.5mm_EP1.23x1.23mm | U6 |
| 1 | Motor_Servo | PinSocket_1x03_P2.54mm_Vertical | M1 |
| 2 | Q_PMOS_GSD | SOT-23 | Q1, Q2 |
| 2 | MMBT3904 | SOT-23 | Q3, Q4 |
| 1 | Crystal | Crystal_SMD_3215-2Pin_3.2x1.5mm | Y1 |
| 1 | USB_B_Micro | 920-E52A2021S10100 | J1 |
| 1 | Micro_SD_Card | SD_Micro | J2 |
| 1 | Neopixel | PinSocket_1x03_P2.54mm_Vertical | J3 |
| 2 | Conn_01x03 | PinSocket_1x03_P2.54mm_Vertical | J4, J5 |
| 1 | Battery_Cell | CR1220 | BT1 |
| 1 | Battery | PinSocket_1x02_P2.54mm_Vertical | BT2 |
| 1 | Buzzer | Buzzer_12x9.5RM7.6 | BZ1 |
| 1 | Speaker | PinSocket_1x02_P2.54mm_Vertical | LS1 |
| 1 | SW_Push | SW_SPST_SKQG_WithStem | SW2 |
| 3 | D_Shockley | D_SOD-323 | D1, D2, D3 |
| 1 | D_Zener | D_SMA | D4 |
Show 19 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | D_Shockley | D_SMA | D5, D6 |
| 1 | LED | LED_0603_1608Metric | D7 |
| 2 | 6.8uH | SWPA5040S | L1, L2 |
| 5 | 1uF | C_0402_1005Metric | C1, C6, C9, C26, C29 |
| 4 | 10nF | C_0402_1005Metric | C2, C5, C21, C23 |
| 2 | 1nF | C_0402_1005Metric | C3, C12 |
| 2 | 47pF | C_0402_1005Metric | C4, C20 |
| 5 | 100nF | C_0402_1005Metric | C7, C8, C11, C19, C27 |
| 4 | 4.7uF | C_0402_1005Metric | C10, C13, C14, C15 |
| 8 | 22uF | C_0805_2012Metric | C16, C17, C18, C22, C24, C25, C30, C31 |
| 1 | 10uF | C_0603_1608Metric | C28 |
| 4 | 100K | R_0402_1005Metric | R1, R2, R3, R7 |
| 7 | 10K | R_0402_1005Metric | R4, R5, R9, R14, R16, R17, R18 |
| 2 | 29.4k | R_0402_1005Metric | R6, R8 |
| 1 | 3.3K | R_0402_1005Metric | R10 |
| 1 | 12K | R_0402_1005Metric | R11 |
| 1 | 470R | R_0402_1005Metric | R12 |
| 1 | 180R | R_0603_1608Metric | R13 |
| 1 | 2.2K | R_0402_1005Metric | R15 |
Bluetooth beacon pcbs design files
The KiCad project lives in the TheCacophonyProject/bluetooth-beacon-pcbs repository on GitHub; these links point at the commit this page was built from.
Bluetooth beacon pcbs: common questions
What microcontroller does the Bluetooth beacon pcbs use?
The Bluetooth beacon pcbs is built around the ESP32-WROOM-32, from the ESP32 family.
How big is the Bluetooth beacon pcbs PCB?
The Bluetooth beacon pcbs measures 74.5 × 47 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Bluetooth beacon pcbs?
80 components, from 39 distinct parts. The full bill of materials is listed on this page.
Where can I download the Bluetooth beacon pcbs design files?
From the TheCacophonyProject/bluetooth-beacon-pcbs repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Bluetooth beacon pcbs design in my own project?
Yes, under the terms of its GPL-3.0 license, which TheCacophonyProject chose for the repository.
Can I test firmware for the Bluetooth beacon pcbs without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k