8 open source boards using the MAX98357
Real designs built with the MAX98357, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Raspberry Pi
Haxo hw
cardonabits
102.4 × 211.3 mm38 parts2LCustom license673ESP32
IoT12 Control Board
atoomnetmarc
99.1 × 69.9 mm66 parts2LApache-2.014ESP32
WifiWallSwitch
Uspizig
65.4 × 68 mm141 parts2LGPL-3.04Chisel nes
shino-hinaduki
100 × 100 mm108 parts2LGPL-3.04ESP32
Sunrise clock main board
atoomnetmarc
160 × 106.7 mm124 parts2LApache-2.00ESP32
Bluetooth beacon pcbs
TheCacophonyProject
74.5 × 47 mm80 parts2LGPL-3.00AVR/Arduino
Rasle
tbowmo
65 × 56 mm70 parts2LNo license0ESP32
SnakeBoy
Nadoooor
180 × 85 mm22 parts2LMIT0
How designs wire the MAX98357
Read from the KiCad layouts of 8 open source designs, one per repository: what each pin of the MAX98357 connects to, and the resistors, capacitors and other passives placed on it.
- The VDD pins have a decoupling capacitor on 5 of 8 designs, most often 100 nF (then 10 µF).
- The SD_MODE pin has a series resistor on 4 of 8 designs, most often 100 kΩ (then 0 Ω).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| GNDpin 3, 11, 15 | Connected to: GND 83% · a signal 17% | — |
| SD_MODEpin 4 | Connected to: A connector 25% |
|
| N.C.pin 5, 6, 13 | Connected to: Not connected 76% | — |
| VDDpin 7, 8 | Connected to: 5V 75% · a signal 19% |
|
| NCpin 12 | Connected to: Not connected 100% | — |
| EPpin 17 | Connected to: GND 100% | — |
6 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Haxo hw by cardonabits, IoT12 Control Board by atoomnetmarc, Chisel nes by shino-hinaduki and WifiWallSwitch by Uspizig.
The MAX98357 in open source designs
The gallery holds 8 open source boards using the MAX98357 from 8 GitHub repositories; a typical one measures about 99.5 × 77.4 mm and carries around 75 components.
100% are two-layer designs, the rest use four layers or more, and 75% carry an open source license.
The most starred is Haxo hw by cardonabits.
Parts used alongside the MAX98357
Microcontrollers on boards using the MAX98357
What boards using the MAX98357 are built for
MAX98357: common questions
Where can I find a MAX98357 reference design?
Each of the 8 boards on this page is a real design using the MAX98357. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the MAX98357 VDD pin?
The VDD pins have a decoupling capacitor on 5 of 8 designs, most often 100 nF (then 10 µF). Counted from the KiCad layouts of 8 open source designs using the MAX98357.
What resistor goes on the MAX98357 SD_MODE pin?
The SD_MODE pin has a series resistor on 4 of 8 designs, most often 100 kΩ (then 0 Ω). Counted from the KiCad layouts of 8 open source designs using the MAX98357.
Which microcontrollers do boards using the MAX98357 use?
Most are built on ESP32 (5), AVR/Arduino (1) and Raspberry Pi (1).
How big is a typical board using the MAX98357?
The median is 99.5 × 77.4 mm, and 100% are two-layer designs.
What is the most popular open source board using the MAX98357?
By GitHub stars, Haxo hw by cardonabits, with 673 stars.
Can I simulate one of these boards using the MAX98357 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.