Revolwer
thefoolGame·revolwer·schemat/schemat.kicad_pcb
About the Revolwer PCB
Revolwer is an open source PCB design by thefoolGame, published on GitHub. It is a 2-layer board measuring 100 × 100 mm, with 91 components from 55 distinct parts.
Other key parts include the NE555P, 74LS390, 7400, 74HC86 and 74LS32. By type, the board carries 34 resistors, 21 test points, 14 ICs, 9 capacitors, 4 transistors and 4 diodes.
Main components on the Revolwer
Revolwer bill of materials (BOM)
91 components, 55 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 3 | NE555P | DIP-8_W7.62mm | U1, U3, U5 |
| 2 | 74LS390 | DIP-16_W7.62mm | U2, U10 |
| 2 | 7400 4011 | DIP-14_W7.62mm | U4, U7 |
| 1 | 74HC86 | DIP-14_W7.62mm | U6 |
| 1 | 74LS32 | DIP-14_W7.62mm | U8 |
| 2 | 4511 | DIP-16_W7.62mm | U11, U12 |
| 2 | D148K | 7SegmentLED_LTS6760_LTS6780 | U13, U14 |
| 1 | 4011 | DIP-14_W7.62mm | U16 |
| 4 | BC547 | TO-92 | Q1, Q2, Q3, Q4 |
| 1 | Light Test Bridge | PinHeader_1x02_P2.54mm_Vertical | J1 |
| 1 | Power Pins | Molex_KK-254_AE-6410-02A_1x02_P2.54mm_Vertical | J2 |
| 1 | SW_MEC_5E Player 1 | SW_PUSH_6mm_H5mm | SW1 |
| 1 | SW_MEC_5E Player 2 | SW_PUSH_6mm_H5mm | SW2 |
| 1 | SW_MEC_5E SW_Push | SW_PUSH_6mm_H5mm | SW3 |
| 1 | 5V TP | PinHeader_1x01_P2.54mm_Vertical | TP1 |
| 1 | 10kHz TP | PinHeader_1x01_P2.54mm_Vertical | TP2 |
| 1 | StartPulse TP | PinHeader_1x01_P2.54mm_Vertical | TP3 |
| 1 | NegatedTimerErnable TP | PinHeader_1x01_P2.54mm_Vertical | TP4 |
| 1 | RandomizerQ3 TP | PinHeader_1x01_P2.54mm_Vertical | TP5 |
| 1 | RandomizerQ2 TP | PinHeader_1x01_P2.54mm_Vertical | TP6 |
Show 35 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | RandomizerQ1 TP | PinHeader_1x01_P2.54mm_Vertical | TP7 |
| 1 | RandomizerQ0 TP | PinHeader_1x01_P2.54mm_Vertical | TP8 |
| 1 | RandomizerResistance TP | PinHeader_1x01_P2.54mm_Vertical | TP9 |
| 1 | BlockPlayer1 TS | PinHeader_1x01_P2.54mm_Vertical | TP10 |
| 1 | BlockPlayer2 TS | PinHeader_1x01_P2.54mm_Vertical | TP11 |
| 1 | UserVictory TP | PinHeader_1x01_P2.54mm_Vertical | TP12 |
| 1 | 100Hz TP | PinHeader_1x01_P2.54mm_Vertical | TP13 |
| 1 | TimerReset TP | PinHeader_1x01_P2.54mm_Vertical | TP14 |
| 1 | ResetSignal TP | PinHeader_1x01_P2.54mm_Vertical | TP15 |
| 1 | User1Signal TP | PinHeader_1x01_P2.54mm_Vertical | TP16 |
| 1 | User2Signal TP | PinHeader_1x01_P2.54mm_Vertical | TP17 |
| 1 | StartSignal TP | PinHeader_1x01_P2.54mm_Vertical | TP18 |
| 1 | User2Victory TP | PinHeader_1x01_P2.54mm_Vertical | TP19 |
| 1 | User1Victory TP | PinHeader_1x01_P2.54mm_Vertical | TP20 |
| 1 | GND TP | PinHeader_1x01_P2.54mm_Vertical | TP21 |
| 3 | LED | LED_D4.0mm | D1, D2, D3 |
| 1 | 1N5819 | D_DO-41_SOD81_P10.16mm_Horizontal | D4 |
| 3 | 100N 10n | C_Disc_D3.4mm_W2.1mm_P2.50mm | C1, C2, C3 |
| 2 | 10n | C_Disc_D3.4mm_W2.1mm_P2.50mm | C4, C8 |
| 3 | 10N 10n | C_Disc_D3.4mm_W2.1mm_P2.50mm | C5, C6, C7 |
| 1 | 100N 100n | C_Disc_D6.0mm_W2.5mm_P5.00mm | C9 |
| 3 | 10K 10k | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1, R2, R3 |
| 2 | 4K7 4k7 | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R4, R5 |
| 1 | 680K 680k | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R6 |
| 2 | 18K 18k | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R7, R9 |
| 1 | 82K 82k | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R8 |
| 1 | 390K 390k | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R10 |
| 1 | 47K 47k | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R11 |
| 1 | 180K 180k | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R12 |
| 2 | 22K 22k | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R13, R14 |
| 1 | 2K7 2k7 | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R15 |
| 1 | 44K 44k | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R16 |
| 1 | 50K 50k | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R17 |
| 14 | 100R | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R18, R19, R20, R21, R22, R23, R24, R25 +6 |
| 3 | 150R | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R32, R33, R34 |
Revolwer design files
The KiCad project lives in the thefoolGame/revolwer repository on GitHub; these links point at the commit this page was built from.
- Layoutschemat/schemat.kicad_pcb
- Schematicschemat/schemat.kicad_sch
- BOMschemat/bom.csv
Revolwer: common questions
How big is the Revolwer PCB?
The Revolwer measures 100 × 100 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Revolwer?
91 components, from 55 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Revolwer design files?
From the thefoolGame/revolwer repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Revolwer design in my own project?
The repository has no license, so all rights stay with thefoolGame. Use it as a reference, and ask the author before reusing the design.