6 open source boards using the D148K

Real designs built with the D148K, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

6 boardsClear filters|Most starred

How designs wire the D148K

Read from the KiCad layouts of 6 open source designs, one per repository: what each pin of the D148K connects to, and the resistors, capacitors and other passives placed on it.

  • The E pin has a series resistor on 4 of 6 designs, most often 220 Ω (then 330 Ω).
  • The D pin has a series resistor on 4 of 6 designs, most often 220 Ω (then 330 Ω).
  • The C pin has a series resistor on 4 of 6 designs, most often 220 Ω (then 330 Ω).
  • The B pin has a series resistor on 4 of 6 designs, most often 220 Ω (then 330 Ω).
Epin 1Connected to: D148K 50%
  • Series resistor on 67% · 220 Ω (1), 330 Ω (1), 100 Ω (1)
Dpin 2Connected to: D148K 50%
  • Series resistor on 67% · 220 Ω (1), 330 Ω (1), 100 Ω (1)
Cpin 4Connected to: D148K 50%
  • Series resistor on 67% · 220 Ω (1), 330 Ω (1), 100 Ω (1)
DPpin 5Connected to: D148K 40% · not connected 20% · GND 20%
  • Series resistor on 40% · 220 Ω (1)
Bpin 6Connected to: D148K 50%
  • Series resistor on 67% · 220 Ω (1), 330 Ω (1), 100 Ω (1)
Apin 7Connected to: D148K 50%
  • Series resistor on 67% · 220 Ω (1), 330 Ω (1), 100 Ω (1)
Fpin 9Connected to: D148K 50%
  • Series resistor on 67% · 220 Ω (1), 330 Ω (1), 100 Ω (1)
Gpin 10Connected to: D148K 50%
  • Series resistor on 67% · 220 Ω (1), 330 Ω (1), 100 Ω (1)

1 more pin varies from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include SAP-Plus Output Register by TomNisbet, Carte testeur d'Oya by bpmine, 8-bit computer by dragonruler1000 and Display by mirkopetrovich.

The D148K in open source designs

The gallery holds 6 open source boards using the D148K from 6 GitHub repositories; a typical one measures about 101 × 99.5 mm and carries around 75 components.

83% are two-layer designs, the rest use four layers or more, and 33% carry an open source license.

The most starred is SAP-Plus Output Register by TomNisbet.

Parts used alongside the D148K

Microcontrollers on boards using the D148K

What boards using the D148K are built for

D148K: common questions

Where can I find a D148K reference design?

Each of the 6 boards on this page is a real design using the D148K. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What resistor goes on the D148K E pin?

The E pin has a series resistor on 4 of 6 designs, most often 220 Ω (then 330 Ω). Counted from the KiCad layouts of 6 open source designs using the D148K.

What resistor goes on the D148K D pin?

The D pin has a series resistor on 4 of 6 designs, most often 220 Ω (then 330 Ω). Counted from the KiCad layouts of 6 open source designs using the D148K.

What resistor goes on the D148K C pin?

The C pin has a series resistor on 4 of 6 designs, most often 220 Ω (then 330 Ω). Counted from the KiCad layouts of 6 open source designs using the D148K.

What parts are used alongside the D148K?

The 74LS138, 74LS161, 74LS32 and NE555P appear in the most repositories here.

Which microcontrollers do boards using the D148K use?

Most are built on AVR/Arduino (1).

How big is a typical board using the D148K?

The median is 101 × 99.5 mm, and 83% are two-layer designs.

What is the most popular open source board using the D148K?

By GitHub stars, SAP-Plus Output Register by TomNisbet, with 10 stars.

Can I simulate one of these boards using the D148K before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part