9 open source boards using the TL431D
Real designs built with the TL431D, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Przetwora v2
ThertyOne
73 × 66 mm32 parts2LNo license1StepperMotorController
efebasol
162.8 × 117.8 mm85 parts2LNo license0Guitar interface
DomenLemut
30 × 100.2 mm58 parts2LNo license0PCB
SS-Adithya
200 × 100 mm54 parts2LAGPL-3.00AVR/Arduino
Pro3
Gehtschon
100 × 100 mm52 parts4LNo license0ESP32
Projet 1DA
johan-954
42 × 35 mm36 parts2LNo license0220V-240V-ac to-5V-2A-dc power coversion
abrshzeth
108.3 × 48 mm27 parts2LNo license0Esquematico check2
fadelrio
100 × 50 mm30 parts2LNo license3DI
DomenLemut
86.3 × 86 mm23 parts2LNo license0
How designs wire the TL431D
Read from the KiCad layouts of 8 open source designs, one per repository: what each pin of the TL431D connects to, and the resistors, capacitors and other passives placed on it.
- Pin 4 is left unconnected on 6 of 6 designs.
- Pin 5 is left unconnected on 6 of 6 designs.
- The A pins is tied to GND on 68% of them (not connected on 4, a signal on 4).
- The REF pin has a series resistor on 3 of 6 designs, most often 22 kΩ (then 10 kΩ).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| Kpin 1 | Connected to: Signal 50% · GND 25% · 2.5V 25% |
|
| Apin 2, 3, 6, 7 | Connected to: GND 68% | — |
| Pin 4 | Connected to: Not connected 100% | — |
| Pin 5 | Connected to: Not connected 100% | — |
| REFpin 8 | Connected to: Signal 100% |
|
Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Esquematico check2 by fadelrio, Przetwora v2 by ThertyOne, 220V-240V-ac to-5V-2A-dc power coversion by abrshzeth and Guitar interface by DomenLemut.
The TL431D in open source designs
The gallery holds 9 open source boards using the TL431D from 8 GitHub repositories; a typical one measures about 100 × 86 mm and carries around 36 components.
89% are two-layer designs, the rest use four layers or more, and 11% carry an open source license.
The most starred is Esquematico check2 by fadelrio.
Microcontrollers on boards using the TL431D
What boards using the TL431D are built for
TL431D: common questions
Where can I find a TL431D reference design?
Each of the 9 boards on this page is a real design using the TL431D. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the TL431D pin 4 connected?
Pin 4 is left unconnected on 6 of 6 designs. Counted from the KiCad layouts of 8 open source designs using the TL431D.
How is the TL431D pin 5 connected?
Pin 5 is left unconnected on 6 of 6 designs. Counted from the KiCad layouts of 8 open source designs using the TL431D.
How is the TL431D A pin connected?
The A pins is tied to GND on 68% of them (not connected on 4, a signal on 4). Counted from the KiCad layouts of 8 open source designs using the TL431D.
Which microcontrollers do boards using the TL431D use?
Most are built on AVR/Arduino (1) and ESP32 (1).
How big is a typical board using the TL431D?
The median is 100 × 86 mm, and 89% are two-layer designs.
What is the most popular open source board using the TL431D?
By GitHub stars, Esquematico check2 by fadelrio, with 3 stars.
Can I simulate one of these boards using the TL431D before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.