REV10a

thestumbler·buspirate5-hardware-mechanical·pcb/REV10a/REV10a.kicad_pcb

REV10a PCB layout, top view — open source RP2040/RP2350 board by thestumbler

About the REV10a PCB

REV10a is an open source RP2040/RP2350 PCB design by thestumbler, published on GitHub under the MIT license. It is a 4-layer board measuring 80 × 80 mm, with 210 components from 54 distinct parts.

Its main chip is the RP2040, from the RP2040/RP2350 family. Other key parts include the W25Q128JVSIQ, MT29F1G01ABAFDWB, AiP74LVC1T45GC363.TR, ME6211A33PG-N and CD4067. By type, the board carries 78 capacitors, 59 resistors, 24 ICs, 18 LEDs, 13 transistors and 9 diodes.

From the project

Bus Pirate 5 enclosure mechanical envelope drawing / OpenSCAD to KiCad

This repo has some scripts to enable semi-automatic preparation of mechanical envelope drawing of the Bus Pirate 5 enclosure.

The enclosure is designed in OpenSCAD. Getting 2D dimension drawings out of OpenSCAD, while possible, is awkward ( see this repo for example ). It is straightforward to make an XY projection or cut of an object. And KiCad has basic dimensioning for several versions now. So the approach taken is

REV10a, from the project README
From the project README

Main components on the REV10a

REV10a bill of materials (BOM)

210 components, 54 distinct parts.

QtyPartRefs
1
W25Q128JVSIQ
U102
1
RP2040
U103
1
MT29F1G01ABAFDWB
U105
8
AiP74LVC1T45GC363.TR
U301, U302, U303, U304, U305, U306, U307, U308
1
ME6211A33PG-N
U401
1
CD4067
U402
1
AP2127
U403
3
LMV321
U404, U506, U603
2
AIP74HC595TA
U501, U502
1
AIP74HCT245TA
U503
2
LMV324
U504, U505
1
LMV321A
U601
1
LMV331
U602
1
MMBT7002K
Q202
10
SI2301
Q300, Q301, Q302, Q303, Q304, Q305, Q306, Q307 +2
1
BCM857
Q401
1
MMDT3906
Q601
1
12Mhz
Y101
1
Conn_01x03
J201
1
TYPE-C-31-M-12
J202
Show 34 more
QtyPartRefs
1
Conn_01x10
J301
1
Conn_01x09
J302
1
TFT_20_QT200H1201
LCD201
1
SW_SPST
SW101
1
4P_button_sw
SW102
8
SK6812-side-a_b
LED701, LED704, LED707, LED708, LED712, LED716, LED717, LED720
10
SK6812-mini-e
LED702, LED703, LED705, LED706, LED710, LED713, LED714, LED715 +2
4
1N4148WT
D401, D601, D602, D603
5
BAS40T-05
D500, D501, D502, D503, D504
1
1.5A
L201
58
0.1uF
C103, C110, C111, C112, C113, C114, C115, C116 +50
10
2.2uF
C104, C107, C108, C109, C405, C413, C504, C507 +2
2
15pF
C105, C106
6
4.7uF
C201, C202, C401, C402, C404, C407
1
120pF
C408
1
DNF
C603
4
1K
R101, R502, R602, R603
1
DNF
R102
4
200R
R103, R208, R608, R612
2
5.1K
R201, R204
2
22R
R202, R203
1
33R
R209
14
10K
R301, R313, R402, R406, R407, R410, R414, R415 +6
2
510R
R316, R320
3
100K
R319, R401, R412
1
102K
R403
1
133K
R404
5
33K
R405, R408, R409, R604, R605
1
0R2
R601
4
330R
RN301, RN305, RN306, RN309
4
1M
RN302, RN304, RN307, RN310
4
100K
RN303, RN308, RN317, RN318
2
10K
RN311, RN312
4
510R
RN315, RN400, RN401, RN402

REV10a design files

The KiCad project lives in the thestumbler/buspirate5-hardware-mechanical repository on GitHub; these links point at the commit this page was built from.

REV10a: common questions

What microcontroller does the REV10a use?

The REV10a is built around the RP2040, from the RP2040/RP2350 family.

How big is the REV10a PCB?

The REV10a measures 80 × 80 mm, has 4 copper layers and is 1.6 mm thick.

How many components are on the REV10a?

210 components, from 54 distinct parts. The full bill of materials is listed on this page.

Where can I download the REV10a design files?

From the thestumbler/buspirate5-hardware-mechanical repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the REV10a design in my own project?

Yes, under the terms of its MIT license, which thestumbler chose for the repository.

Can I test firmware for the REV10a without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.

Similar boards