4 open source boards using the ME6211A33PG-N

Real designs built with the ME6211A33PG-N, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

4 boardsClear filters|Most starred

The ME6211A33PG-N in open source designs

The gallery holds 4 open source boards using the ME6211A33PG-N from 4 GitHub repositories; a typical one measures about 68.8 × 65 mm and carries around 168 components.

75% use four copper layers or more, and 50% carry an open source license.

The most starred is BusPirate-5-rev10 by DangerousPrototypes.

Microcontrollers on boards using the ME6211A33PG-N

What boards using the ME6211A33PG-N are built for

ME6211A33PG-N: common questions

Where can I find a ME6211A33PG-N reference design?

Each of the 4 boards on this page is a real design using the ME6211A33PG-N. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What parts are used alongside the ME6211A33PG-N?

The AP2127, CD4067, LMV321, LMV321A and LMV324 appear in the most repositories here.

Which microcontrollers do boards using the ME6211A33PG-N use?

Most are built on RP2040/RP2350 (2), ESP32 (1) and STM32 (1).

How big is a typical board using the ME6211A33PG-N?

The median is 68.8 × 65 mm, and 25% are two-layer designs.

What is the most popular open source board using the ME6211A33PG-N?

By GitHub stars, BusPirate-5-rev10 by DangerousPrototypes, with 124 stars.

Can I simulate one of these boards using the ME6211A33PG-N before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part