Flight-Computer

Tim-Drake0·Flight-Computer

Flight-Computer PCB layout, top view — open source NXP board by Tim-Drake0

About the Flight-Computer PCB

Flight-Computer is an open source NXP PCB design by Tim-Drake0, published on GitHub. It is a 2-layer board measuring 82 × 38 mm, with 61 components from 38 distinct parts.

Its main chip is the Teensy4.1, from the NXP family. Other key parts include the MS5611-01BA, L7805, ACS711xLCTR-25AB, ICM-42670-P and SAM-M10Q-0-10. By type, the board carries 22 resistors, 10 capacitors, 8 ICs, 7 connectors, 5 transistors and 4 test points.

Flight-Computer, from the project README
From the project README

Main components on the Flight-Computer

Flight-Computer bill of materials (BOM)

61 components, 38 distinct parts.

QtyPartRefs
1
MS5611-01BA
U1
1
L7805
U2
1
ACS711xLCTR-25AB
U3
1
ICM-42670-P
U4
1
SAM-M10Q-0-10
U5
1
ADXL375BCCZ
U6
1
Teensy4.1
U7
1
RFM95W-868S2
U8
1
MMBT3904
Q1
4
SiS454DN
Q2, Q3, Q4, Q5
1
Conn_01x02_Pin
J1
1
USB_B_Micro
J2
1
Conn_02x06_Odd_Even
J3
1
Screw_Terminal_01x08
J4
1
Screw_Terminal_01x04
J5
1
Conn_Coaxial_Small
J6
1
Conn_Coaxial_Small
J7
1
500mA
F1
1
PS1240P02BT
LS1
4
TestPoint
TP1, TP2, TP3, TP4
Show 18 more
QtyPartRefs
1
RED
D1
1
GRN
D2
1
BLUE
D3
3
0.1u
C1, C2, C6
1
1n
C3
2
22u
C4, C5
1
2.2u
C7
1
0.01u
C8
1
1u
C9
1
10u
C10
3
1k5
R1, R4, R6
2
270
R2, R8
2
91
R3, R9
1
100
R5
2
1k
R7, R16
4
10k
R10, R11, R17, R18
4
5k
R12, R13, R19, R20
4
4.7k
R14, R15, R21, R22

Flight-Computer design files

The KiCad project lives in the Tim-Drake0/Flight-Computer repository on GitHub; these links point at the commit this page was built from.

Flight-Computer: common questions

What microcontroller does the Flight-Computer use?

The Flight-Computer is built around the Teensy4.1, from the NXP family.

How big is the Flight-Computer PCB?

The Flight-Computer measures 82 × 38 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Flight-Computer?

61 components, from 38 distinct parts. The full bill of materials is listed on this page.

Where can I download the Flight-Computer design files?

From the Tim-Drake0/Flight-Computer repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Flight-Computer design in my own project?

The repository has no license, so all rights stay with Tim-Drake0. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Flight-Computer without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug NXP firmware against it before you order a PCB.

Similar boards