24 open source boards using the ICM-42670-P

Real designs built with the ICM-42670-P, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

24 boardsClear filters|Most starred

How designs wire the ICM-42670-P

Read from the KiCad layouts of 17 open source designs, one per repository: what each pin of the ICM-42670-P connects to, and the resistors, capacitors and other passives placed on it.

  • The VDDIO pin has a decoupling capacitor on 16 of 17 designs, most often 100 nF (then 10 nF).
  • The VDD pin has a decoupling capacitor on 16 of 17 designs, most often 100 nF (then 10 nF).
  • The RESV_3 pin is left unconnected on 14 of 17 designs (GND on 3).
  • The RESV_4 pin is left unconnected on 14 of 17 designs (GND on 3).
RESV_1pin 2Connected to: Not connected 76% · GND 24%
RESV_2pin 3Connected to: Not connected 76% · GND 24%
VDDIOpin 5Connected to: 3.3V 100%
  • Decoupling capacitor on 94% · 100 nF (22), 10 nF (12), 1 µF (6)
GNDpin 6Connected to: GND 100%
FSYNCpin 7Connected to: GND 76%
VDDpin 8Connected to: 3.3V 100%
  • Decoupling capacitor on 94% · 100 nF (23), 10 nF (12), 2.2 µF (5)
RESV_3pin 10Connected to: Not connected 82% · GND 18%
RESV_4pin 11Connected to: Not connected 82% · GND 18%
AP_CSpin 12Connected to: The microcontroller 29% · 3.3V 41%
  • Capacitor to GND on 35% · 100 nF (8), 1 µF (2), 10 nF (2)
AP_SCL/AP_SCLKpin 13Connected to: The microcontroller 53%, a connector 24%
  • Pull-up to 3.3V on 65% · 10 kΩ (6), 4.7 kΩ (3), 2.7 kΩ (1)
AP_SDA/AP_SDIO/AP_SDIpin 14Connected to: The microcontroller 53%, a connector 24%
  • Pull-up to 3.3V on 65% · 10 kΩ (6), 4.7 kΩ (3), 2.7 kΩ (1)

3 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Esp rust board by esp-rs, Sensor Board by ElectronicCats, Esp with imu by ajwock and ESP32-C3-DevKit-RUST-1 by swayerloren.

The ICM-42670-P in open source designs

The gallery holds 24 open source boards using the ICM-42670-P from 17 GitHub repositories; a typical one measures about 57.9 × 59.7 mm and carries around 64 components.

54% are two-layer designs, the rest use four layers or more, and 33% carry an open source license.

The most starred is Esp rust board by esp-rs.

Microcontrollers on boards using the ICM-42670-P

ICM-42670-P: common questions

Where can I find a ICM-42670-P reference design?

Each of the 24 boards on this page is a real design using the ICM-42670-P. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What decoupling capacitors do designs use on the ICM-42670-P VDDIO pin?

The VDDIO pin has a decoupling capacitor on 16 of 17 designs, most often 100 nF (then 10 nF). Counted from the KiCad layouts of 17 open source designs using the ICM-42670-P.

What decoupling capacitors do designs use on the ICM-42670-P VDD pin?

The VDD pin has a decoupling capacitor on 16 of 17 designs, most often 100 nF (then 10 nF). Counted from the KiCad layouts of 17 open source designs using the ICM-42670-P.

How is the ICM-42670-P RESV_3 pin connected?

The RESV_3 pin is left unconnected on 14 of 17 designs (GND on 3). Counted from the KiCad layouts of 17 open source designs using the ICM-42670-P.

What parts are used alongside the ICM-42670-P?

The ESP32-C3-MINI-1, MCP73831T-2ACI/OT, SHTC3, SY8088 and BMP581 appear in the most repositories here.

Which microcontrollers do boards using the ICM-42670-P use?

Most are built on ESP32 (11), STM32 (4), RP2040/RP2350 (3) and NXP (1).

How big is a typical board using the ICM-42670-P?

The median is 57.9 × 59.7 mm, and 54% are two-layer designs.

What is the most popular open source board using the ICM-42670-P?

By GitHub stars, Esp rust board by esp-rs, with 648 stars.

Can I simulate one of these boards using the ICM-42670-P before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part