HardLabs

Esp32c3 devboard

tmilkovic51·esp32c3_devboard

Esp32c3 devboard PCB layout, top view — open source ESP32 board by tmilkovic51

About the Esp32c3 devboard PCB

Esp32c3 devboard is an open source ESP32 PCB design by tmilkovic51, published on GitHub under the CERN-OHL-P-2.0 license. It is a 4-layer board measuring 47 × 34 mm, with 69 components from 29 distinct parts.

Its main chip is the ESP32-C3-WROOM-02-SOCKET, from the ESP32 family. Other key parts include the AMS1117-3.3, SRV05-4, USB2514B_BI and CP2102N-A01-GQFN28. By type, the board carries 24 capacitors, 23 resistors, 5 ICs, 5 diodes, 4 jumpers and 3 connectors.

It belongs with the dev boards & breakouts and usb & debug tools designs in this gallery.

From the project

A development board integrating the socket for easily swapping the ESP32-C3-WROOM-02 modules, designed in KiCad

Esp32c3 devboard, from the project README
From the project README

Main components on the Esp32c3 devboard

AMS1117-3.3SRV05-4USB2514B_BICP2102N-A01-GQFN28ESP32-C3-WROOM-02-SOCKET

Esp32c3 devboard bill of materials (BOM)

69 components, 29 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
AMS1117-3.3
U1
1
SRV05-4
U2
1
USB2514B_BI
USB2514B_Bi
U3
1
CP2102N-A01-GQFN28
U4
1
ESP32-C3-WROOM-02-SOCKET
U5
2
S8050
Q1, Q2
1
24MHZ
24MHz
Y1
1
USB_C_RECEPTACLE_USB2.0
USB_C_Receptacle_USB2.0
J1
2
Conn_01x15_Male
J2, J3
1
GPIO18_SB
JP1
1
GPIO19_SB
JP2
1
GPIO20_SB
JP3
1
GPIO21_SB
JP4
1
BOOT
SW1
1
RST
SW2
1
C2286
PWR_LED
D1
4
SK6805
D2, D3, D4, D5
5
10U
10u
C1, C2, C9, C16, C19
14
100N
100n
C3, C4, C5, C6, C7, C8, C11, C12 +6
1
220N
220n
C10
Show 9 more
QtyPartRefs
2
6P8
6p8
C13, C14
2
1UF
1uF
C17, C18
2
5K1
R1, R2
2
1K
R3, R16
7
100K
R4, R5, R6, R12, R13, R14, R15
1
C25752
12K,1%
R7
9
10K
R8, R9, R10, R11, R19, R20, R21, R22 +1
1
24K
R17
1
47K
R18

Esp32c3 devboard design files

The KiCad project lives in the tmilkovic51/esp32c3_devboard repository on GitHub; these links point at the commit this page was built from.

Esp32c3 devboard: common questions

What microcontroller does the Esp32c3 devboard use?

The Esp32c3 devboard is built around the ESP32-C3-WROOM-02-SOCKET, from the ESP32 family.

How big is the Esp32c3 devboard PCB?

The Esp32c3 devboard measures 47 × 34 mm, has 4 copper layers and is 1.6 mm thick.

How many components are on the Esp32c3 devboard?

69 components, from 29 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Esp32c3 devboard design files?

From the tmilkovic51/esp32c3_devboard repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Esp32c3 devboard design in my own project?

Yes, under the terms of its CERN-OHL-P-2.0 license, which tmilkovic51 chose for the repository.

Can I test firmware for the Esp32c3 devboard without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

Similar boards