HardLabs

Pcb ctrl esp5v

TobiasKaiser·netlantern·pcb_ctrl_esp5v/pcb_ctrl_esp5v.kicad_pcb

Pcb ctrl esp5v layout, top view — open source ESP32 board by TobiasKaiser

About the Pcb ctrl esp5v

Pcb ctrl esp5v is an open source ESP32 PCB design by TobiasKaiser, published on GitHub. It is a 2-layer board measuring 86.4 × 75 mm, with 28 components from 17 distinct parts.

Its main chip is the ESP32-WROOM, from the ESP32 family. Other key parts include the LM1117-ADJ, FT232RL and 74HC00. By type, the board carries 10 capacitors, 6 resistors, 4 ICs, 4 connectors, 2 transistors and 2 switches.

From the project

Internet-controlled RGB LED lantern project: 3D printed enclosure + PCB + SW

8 rows by 4 columns of WS2812B LEDs = 32 LEDs per PCB

192 * 15 mA (worst case current consumption at 3.7 V supply voltage) = 2.88 A total current

Pcb ctrl esp5v, from the project README
From the project README

Main components on the Pcb ctrl esp5v

ESP32-WROOMLM1117-ADJFT232RL74HC00

Pcb ctrl esp5v bill of materials (BOM)

28 components, 17 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
ESP32-WROOM
U1
1
LM1117-ADJ
U2
1
FT232RL
U3
1
74HC00
U4
2
S8050 SOT-23
Q1, Q2
1
USB_B_Micro
J1
1
Barrel_Jack
J2
1
Conn_02x10_Odd_Even
J3
1
Conn_01x03
J4
2
SW_SPST
SW1, SW2
8
100n
C1, C3, C4, C6, C7, C8, C9, C10
1
10u
C2
1
4.7u
C5
3
10k
R1, R2, R4
1
4.7k
R3
1
121
R5
1
200
R6

Pcb ctrl esp5v design files

The KiCad project lives in the TobiasKaiser/netlantern repository on GitHub; these links point at the commit this page was built from.

Pcb ctrl esp5v: common questions

What microcontroller does the Pcb ctrl esp5v use?

The Pcb ctrl esp5v is built around the ESP32-WROOM, from the ESP32 family.

How big is the Pcb ctrl esp5v?

The Pcb ctrl esp5v measures 86.4 × 75 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Pcb ctrl esp5v?

28 components, from 17 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Pcb ctrl esp5v design files?

From the TobiasKaiser/netlantern repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.

Can I use the Pcb ctrl esp5v design in my own project?

The repository has no license, so all rights stay with TobiasKaiser. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Pcb ctrl esp5v without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

More boards in netlantern

Similar boards