Desk notifier
tobiwan88·desk_notifier·hardware/notifier-v1/notifier-v1.kicad_pcb
About the Desk notifier PCB
Desk notifier is an open source ESP32 PCB design by tobiwan88, published on GitHub under the MIT license. It is a 4-layer board measuring 50 × 36 mm, with 34 components from 22 distinct parts.
Its main chip is the ESP32-S3-WROOM-1-N8R2, from the ESP32 family. Other key parts include the USBLC6-2SC6, TLV62569, BME688 and SHT40-AD1B. By type, the board carries 12 capacitors, 12 resistors, 5 ICs, 2 connectors, 1 fuse and 1 diode.
It belongs with the sensors and displays & leds designs in this gallery.
From the project
ESP32-C61 desk notifier: round GC9A01 display, BME688 air quality, clock, pushed pictures
There is one KiCad project: notifier-v1/notifier-v1.kicadpro (schematic + PCB). Open it with hardware/open.sh`, or File > Open Project in KiCad. Everything else is generated.
The KiCad files are regenerated by tools/pipelinev1.sh: edits made in KiCad are overwritten on the next run. Review in KiCad, then change the generators. out/ is not in git; tools/setuptools.sh installs the routers once.
Main components on the Desk notifier
Desk notifier bill of materials (BOM)
34 components, 22 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ESP32-S3-WROOM-1-N8R2 | ESP32-S3-WROOM-1 | U1 |
| 1 | USBLC6-2SC6 | SOT-23-6 | U2 |
| 1 | TLV62569 | SOT-23-5 | U3 |
| 1 | BME688 | Bosch_LGA-8_3x3mm_P0.8mm_ClockwisePinNumbering | U4 |
| 1 | SHT40-AD1B | Sensirion_DFN-4_1.5x1.5mm_P0.8mm_SHT4x_NoCentralPad | U5 |
| 1 | USB-C PWR/DATA | USB_C_Receptacle_HRO_TYPE-C-31-M-12 | J1 |
| 1 | GC9A01 DISPLAY | PinSocket_1x07_P2.54mm_Horizontal | J2 |
| 1 | 500mA | Fuse_1206_3216Metric | F1 |
| 1 | red | LED_0603_1608Metric | D1 |
| 1 | 2.2u | L_Cenker_CKCS4030 | L1 |
| 1 | 10u | C_0603_1608Metric | C1 |
| 3 | 22u | C_0805_2012Metric | C2, C5, C11 |
| 5 | 100n | C_0402_1005Metric | C3, C6, C7, C8, C9 |
| 2 | 1u | C_0402_1005Metric | C4, C10 |
| 1 | 4.7u | C_0603_1608Metric | C12 |
| 2 | 5.1k | R_0402_1005Metric | R1, R2 |
| 3 | 4.7k | R_0402_1005Metric | R3, R7, R8 |
| 2 | 10k | R_0402_1005Metric | R4, R5 |
| 1 | 100k | R_0402_1005Metric | R9 |
| 1 | 22k | R_0402_1005Metric | R10 |
Show 2 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | 22 | R_0402_1005Metric | R11, R12 |
| 1 | 33 | R_0402_1005Metric | R13 |
Desk notifier design files
The KiCad project lives in the tobiwan88/desk_notifier repository on GitHub; these links point at the commit this page was built from.
Desk notifier: common questions
What microcontroller does the Desk notifier use?
The Desk notifier is built around the ESP32-S3-WROOM-1-N8R2, from the ESP32 family.
How big is the Desk notifier PCB?
The Desk notifier measures 50 × 36 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the Desk notifier?
34 components, from 22 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Desk notifier design files?
From the tobiwan88/desk_notifier repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Desk notifier design in my own project?
Yes, under the terms of its MIT license, which tobiwan88 chose for the repository.
Can I test firmware for the Desk notifier without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k