8 open source boards using the 74LVC138

Real designs built with the 74LVC138, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

8 boardsClear filters|Most starred

How designs wire the 74LVC138

Read from the KiCad layouts of 6 open source designs, one per repository: what each pin of the 74LVC138 connects to, and the resistors, capacitors and other passives placed on it.

  • The E2 pin is tied to GND on 5 of 6 designs.
  • The E3 pin is tied to 3.3V on 5 of 6 designs.
  • The E1 pin is tied to GND on 4 of 6 designs (a signal on 2).
E1pin 4Connected to: GND 67% · a signal 33%
E2pin 5Connected to: GND 83% · a signal 17%
E3pin 6Connected to: 3.3V 83% · a signal 17%
GNDpin 8Connected to: GND 100%
VCCpin 16Connected to: 3.3V 100%
  • Decoupling capacitor on 33% · 100 nF (3)

11 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include ISA FPGA v2 by robfinch, 6502 VGA Card Pro by acwright, Trollbook rev2 by trollectronics and Chip lcd dip by cmnybo.

The 74LVC138 in open source designs

The gallery holds 8 open source boards using the 74LVC138 from 6 GitHub repositories; a typical one measures about 100 × 100 mm and carries around 41 components.

75% are two-layer designs, the rest use four layers or more, and 13% carry an open source license.

The most starred is ISA FPGA v2 by robfinch.

Parts used alongside the 74LVC138

Microcontrollers on boards using the 74LVC138

What boards using the 74LVC138 are built for

74LVC138: common questions

Where can I find a 74LVC138 reference design?

Each of the 8 boards on this page is a real design using the 74LVC138. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

How is the 74LVC138 E2 pin connected?

The E2 pin is tied to GND on 5 of 6 designs. Counted from the KiCad layouts of 6 open source designs using the 74LVC138.

How is the 74LVC138 E3 pin connected?

The E3 pin is tied to 3.3V on 5 of 6 designs. Counted from the KiCad layouts of 6 open source designs using the 74LVC138.

How is the 74LVC138 E1 pin connected?

The E1 pin is tied to GND on 4 of 6 designs (a signal on 2). Counted from the KiCad layouts of 6 open source designs using the 74LVC138.

Which microcontrollers do boards using the 74LVC138 use?

Most are built on STM32 (3).

How big is a typical board using the 74LVC138?

The median is 100 × 100 mm, and 75% are two-layer designs.

What is the most popular open source board using the 74LVC138?

By GitHub stars, ISA FPGA v2 by robfinch, with 78 stars.

Can I simulate one of these boards using the 74LVC138 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part