ESP RFLINK

Tommy270502·ESP_RFLINK·hardware/kicad/ESPxRF.kicad_pcb

ESP RFLINK PCB layout, top view — open source ESP32 board by Tommy270502

About the ESP RFLINK PCB

ESP RFLINK is an open source ESP32 PCB design by Tommy270502, published on GitHub under the MIT license. It is a 4-layer board measuring 42 × 49.9 mm, with 40 components from 25 distinct parts.

Its main chip is the ESP32-S3, from the ESP32 family. Other key parts include the USBLC6-2SC6, NCP115ASN330T2G and NRF24L01. By type, the board carries 21 capacitors, 6 resistors, 4 ICs, 3 inductors, 2 connectors and 2 diodes.

It belongs with the iot & wireless and usb & debug tools designs in this gallery.

From the project

ESP32-S3 and nRF24L01+ firmware for a USB-C multi-protocol wireless development bridge with USB serial JSON commands, Wi-Fi/WebSocket, BLE GATT, and RF packet bridging.

Wireless Dev Bridge is a USB-C developer kit for ESP32-S3 and nRF24L01+ work. It gives one bench dongle a shared JSON command protocol over USB serial, HTTP, WebSocket, and BLE, plus a Python SDK, CLI, local web workbench, firmware browser dashboard, KiCad hardware source, and manufacturing outputs.

1. Read Getting Started for firmware build, SDK install, and first RF validation. 2. Use the local web workbench:

ESP RFLINK, from the project README
From the project README

Main components on the ESP RFLINK

ESP RFLINK bill of materials (BOM)

40 components, 25 distinct parts.

QtyPartRefs
1
ESP32-S3
U1
1
USBLC6-2SC6
U2
1
NCP115ASN330T2G
U3
1
NRF24L01
U4
1
Crystal_GND24_Small
Y1
1
USB_C_Receptacle_USB2.0
J1
1
ANT
J2
1
500mA
F1
1
Rx
D1
1
Tx
D2
1
8n2
L1
1
3n9
L2
1
2n7
L3
7
100n
C1, C3, C5, C8, C14, C17, C19
7
10u
C2, C4, C6, C7, C10, C11, C13
1
33n
C9
2
22p
C12, C15
1
2n2
C16
1
4p7
C18
1
1p5
C20
Show 5 more
QtyPartRefs
1
1p
C21
2
1k3
R1, R4
2
5k1
R2, R3
1
22k
R5
1
1M
R6

ESP RFLINK design files

The KiCad project lives in the Tommy270502/ESP_RFLINK repository on GitHub; these links point at the commit this page was built from.

ESP RFLINK: common questions

What microcontroller does the ESP RFLINK use?

The ESP RFLINK is built around the ESP32-S3, from the ESP32 family.

How big is the ESP RFLINK PCB?

The ESP RFLINK measures 42 × 49.9 mm, has 4 copper layers and is 1.5862 mm thick.

How many components are on the ESP RFLINK?

40 components, from 25 distinct parts. The full bill of materials is listed on this page.

Where can I download the ESP RFLINK design files?

From the Tommy270502/ESP_RFLINK repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the ESP RFLINK design in my own project?

Yes, under the terms of its MIT license, which Tommy270502 chose for the repository.

Can I test firmware for the ESP RFLINK without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

Similar boards