7 open source boards using the NCP115ASN330T2G
Real designs built with the NCP115ASN330T2G, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
RP2040/RP2350
ProtoB
X65
50 × 30 mm54 parts4LNo license8FPGA
Mosaic
bitbarista
20.3 × 51.4 mm51 parts4LCustom license3LoRa Pinze Sent
ISS-Lab-Unibo
107 × 51 mm212 parts6LNo license0ESP32
ESP RFLINK
Tommy270502
42 × 49.9 mm40 parts4LMIT0STM32
ADC Board
jkominek
92.7 × 83.8 mm100 parts4LCustom license53RP2040/RP2350
Controller b r1
4lml4
131.5 × 13 mm45 parts4LNo license2STM32
Rev6.0 flat controlstage
oresat
57.6 × 80.1 mm134 parts4LGPL-2.021
How designs wire the NCP115ASN330T2G
Read from the KiCad layouts of 7 open source designs, one per repository: what each pin of the NCP115ASN330T2G connects to, and the resistors, capacitors and other passives placed on it.
- The IN pin is tied to 5V on 7 of 7 designs.
- The EN pin is tied to 3.3V on 7 of 7 designs.
- The OUT pin is tied to 3.3V on 7 of 7 designs.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| INpin 1 | Connected to: 5V 100% | — |
| GNDpin 2 | Connected to: GND 100% | — |
| ENpin 3 | Connected to: 3.3V 100% | — |
| NCpin 4 | Connected to: Not connected 86% | — |
| OUTpin 5 | Connected to: 3.3V 100% | — |
Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include ADC Board by jkominek, Rev6.0 flat controlstage by oresat, ProtoB by X65 and Mosaic by bitbarista.
The NCP115ASN330T2G in open source designs
The gallery holds 7 open source boards using the NCP115ASN330T2G from 7 GitHub repositories; a typical one measures about 57.6 × 51 mm and carries around 54 components.
100% use four copper layers or more, and 29% carry an open source license.
The most starred is ADC Board by jkominek.
Parts used alongside the NCP115ASN330T2G
Microcontrollers on boards using the NCP115ASN330T2G
What boards using the NCP115ASN330T2G are built for
NCP115ASN330T2G: common questions
Where can I find a NCP115ASN330T2G reference design?
Each of the 7 boards on this page is a real design using the NCP115ASN330T2G. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the NCP115ASN330T2G IN pin connected?
The IN pin is tied to 5V on 7 of 7 designs. Counted from the KiCad layouts of 7 open source designs using the NCP115ASN330T2G.
How is the NCP115ASN330T2G EN pin connected?
The EN pin is tied to 3.3V on 7 of 7 designs. Counted from the KiCad layouts of 7 open source designs using the NCP115ASN330T2G.
How is the NCP115ASN330T2G OUT pin connected?
The OUT pin is tied to 3.3V on 7 of 7 designs. Counted from the KiCad layouts of 7 open source designs using the NCP115ASN330T2G.
Which microcontrollers do boards using the NCP115ASN330T2G use?
Most are built on RP2040/RP2350 (2), STM32 (2), ESP32 (1) and FPGA (1).
How big is a typical board using the NCP115ASN330T2G?
The median is 57.6 × 51 mm, and 0% are two-layer designs.
What is the most popular open source board using the NCP115ASN330T2G?
By GitHub stars, ADC Board by jkominek, with 53 stars.
Can I simulate one of these boards using the NCP115ASN330T2G before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.