1.1

tomrodinger·Raspberry_Pi_HAT_RS485·PCB/1.1/1.1.kicad_pcb

1.1 PCB layout, top view — open source Raspberry Pi board by tomrodinger

About the 1.1 PCB

1.1 is an open source Raspberry Pi PCB design by tomrodinger, published on GitHub under the Apache-2.0 license. It is a 2-layer board measuring 46.2 × 30.9 mm, with 75 components from 31 distinct parts.

Its main chip is the C261072, from the Raspberry Pi family. Other key parts include the CP2102N-A02-GQFN24R, LM393DR2G, SP3485EN-L/TR and CD4023BM/TR. By type, the board carries 29 resistors, 14 test points, 12 capacitors, 7 diodes, 5 connectors and 4 ICs.

It belongs with the dev boards & breakouts designs in this gallery.

From the project

This is a Raspberry Pi HAT for RS485 communication with external devices and it should fit into any Raspberry Pi like Zero/Zero2W/3/4

Main components on the 1.1

1.1 bill of materials (BOM)

75 components, 31 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
CP2102N-A02-GQFN24R
SILICON LABS
U1
1
LM393DR2G
onsemi
U2
1
SP3485EN-L/TR
SP3485EN
MaxLinear
U5
1
CD4023BM/TR
HGSEMI
U6
3
BSS84AK,215
Nexperia
Q1, Q2, Q3
1
2N7002
Q_NMOS_GSD
Q4
1
MicroXNJ
USB-Micro
Shou_Han
J1
1
TSM-108-01-T-SH-A-P
TSM-108-01-T-SH-A-P-TR
J2
1
C261072
Raspberry-Pi_2x5-Pin_Header
Boomele
J3
1
CONN_02X03_ODD_EVEN
Conn_02x03_Odd_Even
J4
1
C2765186
USB_C_Receptacle
J5
14
TestPoint
TP1, TP2, TP3, TP4, TP5, TP6, TP7, TP8 +6
2
TPIP4220CZ6
TVS_5V
Tech_Public
D1, D7
1
CUS08F30-H3F
1N5819WS
Toshiba
D2
1
SM712
DOWO
D3
1
KT-0805Y
yellow
Hubei KENTO Elec
D4
1
KT-0805G
green
Hubei KENTO Elec
D5
1
NCD0805R1
red
Foshan Nationstar Optoelectronics
D6
1
CL10C220JB8NNNC
22pF/50V
Samsung
C1
8
CC0603KRX7R9BB104
100nF/50V
Yageo
C2, C4, C7, C8, C9, C11, C12, C16
Show 11 more
QtyPartRefs
2
CL10A106KP8NNNC
10uF/10V
Samsung Electro-Mechanics
C3, C5
1
CL10B102KB8NNNC
1nF
Samsung Electro-Mechanics
C15
2
0603WAF5600T5E
560R
UNI-ROYAL(Uniroyal Elec)
R1, R3
5
0603WAF4701T5E
4.7k
UNI-ROYAL(Uniroyal Elec)
R2, R21, R22, R28, R29
4
0603WAF2002T5E
20k
UNI-ROYAL(Uniroyal Elec)
R4, R13, R20, R26
1
0603WAF2200T5E
220R
UNI-ROYAL(Uniroyal Elec)
R5
7
0603WAF1002T5E
10k
UNI-ROYAL(Uniroyal Elec)
R6, R7, R8, R16, R19, R25, R27
4
0603WAF1001T5E
1k
Uniroyal_Elec
R9, R10, R11, R12
2
5.1K
5.1k
R14, R15
2
0603WAF1005T5E
10M
UNI-ROYAL(Uniroyal Elec)
R17, R18
2
0603WAF750JT5E
75R
UNI-ROYAL(Uniroyal Elec)
R23, R24

1.1 design files

The KiCad project lives in the tomrodinger/Raspberry_Pi_HAT_RS485 repository on GitHub; these links point at the commit this page was built from.

1.1: common questions

What microcontroller does the 1.1 use?

The 1.1 is built around the C261072, from the Raspberry Pi family.

How big is the 1.1 PCB?

The 1.1 measures 46.2 × 30.9 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the 1.1?

75 components, from 31 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the 1.1 design files?

From the tomrodinger/Raspberry_Pi_HAT_RS485 repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the 1.1 design in my own project?

Yes, under the terms of its Apache-2.0 license, which tomrodinger chose for the repository.

Can I test firmware for the 1.1 without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug Raspberry Pi firmware against it before you order a PCB.

More boards in Raspberry_Pi_HAT_RS485

Similar boards