Uw rs485 hat-V5

tomrodinger·Raspberry_Pi_HAT_RS485·PCB/V5/source/KiCAD/uw-rs485_hat-V5.kicad_pcb

Uw rs485 hat-V5 layout, top view — open source Raspberry Pi board by tomrodinger

About the Uw rs485 hat-V5

Uw rs485 hat-V5 is an open source Raspberry Pi PCB design by tomrodinger, published on GitHub under the Apache-2.0 license. It is a 2-layer board measuring 46.7 × 30.9 mm, with 53 components from 28 distinct parts.

Its main chip is the C261072, from the Raspberry Pi family. Other key parts include the CP2102-GMR, LM393DR2G, SP3485EN-L/TR and CD4023BM/TR. By type, the board carries 21 resistors, 12 capacitors, 5 connectors, 5 inductors, 4 ICs and 4 diodes.

It belongs with the dev boards & breakouts designs in this gallery, and the repository also holds 1 earlier revision of it.

From the project

This is a Raspberry Pi HAT for RS485 communication with external devices and it should fit into any Raspberry Pi like Zero/Zero2W/3/4

Main components on the Uw rs485 hat-V5

Uw rs485 hat-V5 bill of materials (BOM)

53 components, 28 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
CP2102-GMR
CP2102
Silabs
U1
1
LM393DR2G
onsemi
U2
1
SP3485EN-L/TR
SP3485EN
MaxLinear
U5
1
CD4023BM/TR
HGSEMI
U6
1
MMS9012-H-TP
MCC(Micro Commercial Components)
Q1
1
MicroXNJ
USB-Micro
Shou_Han
J1
1
TSM-108-01-T-SH-A-P-TR
J2
1
C261072
Raspberry-Pi_2x5-Pin_Header
Boomele
J3
1
B-2100S04P-A110
Conn_01x04
Ckmtw
J4
1
C2765186
USB_C_Receptacle
J5
1
SDCW2012-2-900TF
CM_Choke_90R
Sunlord
T1
1
TPIP4220CZ6
TVS_5V
Tech_Public
D1
1
CUS08F30-H3F
Toshiba
D2
1
SM712
DOWO
D3
1
A-SP194G2C-C01-4T
green
Amicc
D4
5
CBM160808U301T
Bead_300R
Guangdong_Fenghua_Advanced_Tech
L1, L2, L3, L4, L5
1
CL10C220JB8NNNC
22pF/50V
Samsung
C1
8
CL10B104KB8WPNC
100nF/50V
Samsung
C2, C4, C7, C8, C9, C11, C12, C16
2
CL21B106KOQNNNE
10uF/16V
Samsung
C3, C5
1
C1608C0G1H102JT000N
1nF
TDK
C15
Show 8 more
QtyPartRefs
8
RC0603FR-0710KL
10k
Yageo
R1, R3, R4, R6, R7, R8, R16, R19
1
RC0603FR-074K7L
4k7
Yageo
R2
1
CR0603J220RP05Z
220R
Ever Ohms Tech
R5
4
0603WAF1001T5E
1k
Uniroyal_Elec
R9, R10, R11, R12
3
AC0603JR-07560RL
560R
Yageo
R13, R18, R22
2
5.1K
5.1k
R14, R15
1
MCT06030D2002BP500
20k
Vishay Intertech
R20
1
CR0603FA4701G
4.7k
LIZ Elec
R21

Uw rs485 hat-V5 design files

The KiCad project lives in the tomrodinger/Raspberry_Pi_HAT_RS485 repository on GitHub; these links point at the commit this page was built from.

Uw rs485 hat-V5: common questions

What microcontroller does the Uw rs485 hat-V5 use?

The Uw rs485 hat-V5 is built around the C261072, from the Raspberry Pi family.

How big is the Uw rs485 hat-V5?

The Uw rs485 hat-V5 measures 46.7 × 30.9 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Uw rs485 hat-V5?

53 components, from 28 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Uw rs485 hat-V5 design files?

From the tomrodinger/Raspberry_Pi_HAT_RS485 repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Uw rs485 hat-V5 design in my own project?

Yes, under the terms of its Apache-2.0 license, which tomrodinger chose for the repository.

Can I test firmware for the Uw rs485 hat-V5 without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug Raspberry Pi firmware against it before you order a PCB.

More boards in Raspberry_Pi_HAT_RS485

Earlier revisions in the repo: uw-rs485_hat

Similar boards