DAQv3 5
TPierceUCSD·Wireless-motion-capture-data-sycnhronization-system·Hardware/Wearable Node/KiCAD Files/DAQv3_5.kicad_pcb
About the DAQv3 5 PCB
DAQv3 5 is an open source ESP32 PCB design by TPierceUCSD, published on GitHub. It is a 4-layer board measuring 40 × 70 mm, with 51 components from 22 distinct parts.
Its main chip is the ESP32-C3-WROOM-02, from the ESP32 family. Other key parts include the MIC5504-3.3YM5, CP2102N-Axx-xQFN24, AD7689xCP, ADA4807-1 and LSM6DSO32TR. By type, the board carries 16 capacitors, 16 resistors, 10 ICs, 3 connectors, 2 transistors and 1 switch.
It belongs with the iot & wireless, power & battery and sensors designs in this gallery.
From the project
© 2025 Taylor Pierce, Emerson Noble, Lucas Davis, Jesus Wilkins, Kenneth J. Loh. Licensed under CC BY 4.0.
© 2025 Taylor Pierce, Emerson Noble, Lucas Davis, Jesus Wilkins, Kenneth J. Loh. Licensed under CC BY 4.0.
A wireless data acquisition architecture that reconstructs analog sensor signals as voltages at the Vicon Lock Lab™ analog input, enabling direct integration of wearable sensor data into optical motion capture data streams without modification to existing laboratory infrastructure.
Main components on the DAQv3 5
DAQv3 5 bill of materials (BOM)
51 components, 22 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ESP32-C3-WROOM-02 | ESP32-C3-WROOM-02 | U1 |
| 2 | MIC5504-3.3YM5 | SOT-23-5 | U2, U4 |
| 1 | CP2102N-Axx-xQFN24 | QFN-24-1EP_4x4mm_P0.5mm_EP2.6x2.6mm | U3 |
| 1 | AD7689xCP | LFCSP-20-1EP_4x4mm_P0.5mm_EP2.5x2.5mm | U5 |
| 1 | ADA4807-1 | SOT-363_SC-70-6 | U6 |
| 1 | LSM6DSO32TR | XDCR_LSM6DSO32TR | U7 |
| 2 | AD8544ARUZ-REEL | SOP65P640X120-14N | U8, U9 |
| 1 | MCP73831T-2ACI/OT | SOT-23-5_MC_MCH | U10 |
| 2 | MMBT2222A | SOT-23 | Q1, Q2 |
| 1 | 10118192-0002LF | AMPHENOL_10118192-0002LF | J1 |
| 1 | S2B-PH-SM4-TB | CONN_S2B-PH-SM4-TB_JST | J2 |
| 1 | 1787072 | PHOENIX_1787072 | J3 |
| 1 | JS102011SAQN | SW_JS102011SAQN | S1 |
| 1 | COM-16347 | COM-16347_SPK | LED1 |
| 1 | LED | LED_0603_1608Metric | D1 |
| 1 | L | L_0603_1608Metric | L1 |
| 6 | 1uF | C_0603_1608Metric | C1, C2, C3, C4, C5, C6 |
| 5 | 10uF | C_0603_1608Metric | C7, C8, C9, C15, C16 |
| 5 | 0.1uF | C_0603_1608Metric | C10, C11, C12, C13, C14 |
| 7 | 10k | R_0603_1608Metric | R1, R2, R3, R4, R5, R6, R24 |
Show 2 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 8 | 3k | R_0603_1608Metric | R7, R9, R11, R13, R15, R17, R19, R21 |
| 1 | 300 | R_0603_1608Metric | R23 |
DAQv3 5 design files
The KiCad project lives in the TPierceUCSD/Wireless-motion-capture-data-sycnhronization-system repository on GitHub; these links point at the commit this page was built from.
DAQv3 5: common questions
What microcontroller does the DAQv3 5 use?
The DAQv3 5 is built around the ESP32-C3-WROOM-02, from the ESP32 family.
How big is the DAQv3 5 PCB?
The DAQv3 5 measures 40 × 70 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the DAQv3 5?
51 components, from 22 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the DAQv3 5 design files?
From the TPierceUCSD/Wireless-motion-capture-data-sycnhronization-system repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the DAQv3 5 design in my own project?
The repository has no license, so all rights stay with TPierceUCSD. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the DAQv3 5 without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
More boards in Wireless-motion-capture-data-sycnhronization-system
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8k