3 open source boards using the ADA4807-1

Real designs built with the ADA4807-1, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

3 boardsClear filters|Most starred

The ADA4807-1 in open source designs

The gallery holds 3 open source boards using the ADA4807-1 from 3 GitHub repositories; a typical one measures about 119 × 92 mm and carries around 192 components.

67% use four copper layers or more, and 67% carry an open source license.

The most starred is 1fNoiseAmplifierRev13 by curtisseizert.

Microcontrollers on boards using the ADA4807-1

What boards using the ADA4807-1 are built for

ADA4807-1: common questions

Where can I find a ADA4807-1 reference design?

Each of the 3 boards on this page is a real design using the ADA4807-1. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

Which microcontrollers do boards using the ADA4807-1 use?

Most are built on ESP32 (1) and STM32 (1).

How big is a typical board using the ADA4807-1?

The median is 119 × 92 mm, and 33% are two-layer designs.

What is the most popular open source board using the ADA4807-1?

By GitHub stars, 1fNoiseAmplifierRev13 by curtisseizert, with 35 stars.

Can I simulate one of these boards using the ADA4807-1 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part