Pokegotchi---fallout-2026
TrevorLee01·pokegotchi---fallout-2026·PCB files/pokegotchi.kicad_pcb
About the Pokegotchi---fallout-2026 PCB
Pokegotchi---fallout-2026 is an open source ESP32 PCB design by TrevorLee01, published on GitHub. It is a 2-layer board measuring 80 × 80 mm, with 23 components from 16 distinct parts.
Its main chip is the ESP32-S3-WROOM-1, from the ESP32 family. Other key parts include the MCP73831-2-OT, AP2112K-3.3, HS96L03W2C03 and DS3231MZ. By type, the board carries 9 resistors, 5 ICs, 3 switches, 3 capacitors and 2 connectors.
From the project
ONSHAPE LINK: https://cad.onshape.com/documents/4788cfc2c41ccbd3b3bb658b/w/c8008663c56e0ba217e7b347/e/ed1d7d4fd3640974190b7d9b?renderMode=0&uiState=6a3ac660f6d661f4c890654a
ONSHAPE LINK: https://cad.onshape.com/documents/4788cfc2c41ccbd3b3bb658b/w/c8008663c56e0ba217e7b347/e/ed1d7d4fd3640974190b7d9b?renderMode=0&uiState=6a3ac660f6d661f4c890654a
BOM INCLUDED IN THE FILES! "BOM.csv", bottom of this README, or: https://docs.google.com/spreadsheets/d/1ZSV7nk1klidvS7acBAQEKFNUl_y9adzhBfaWMznL6cg/edit?gid=0#gid=0
This pokegotchi comes with 3 whole pokemons - Snorlax - Solosis - Eevee However, Eevee comes with 5 different types of Eeveelution depending on the exact environment (a secret). Play to find out which eeveelution you end up getting!
Main components on the Pokegotchi---fallout-2026
Pokegotchi---fallout-2026 bill of materials (BOM)
23 components, 16 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ESP32-S3-WROOM-1 | ESP32-S3-WROOM-1 | U1 |
| 1 | MCP73831-2-OT | SOT-23-5 | U2 |
| 1 | AP2112K-3.3 | SOT-23-5 | U3 |
| 1 | HS96L03W2C03 HS(汉昇) | OLED-TH_L27.8-W27.2-P2.54_C9900033791 | U4 |
| 1 | DS3231MZ | SOIC-8_3.9x4.9mm_P1.27mm | U5 |
| 1 | USB_C_Receptacle_USB2.0_16P | USB_C_Receptacle_HRO_TYPE-C-31-M-12 | J1 |
| 1 | Conn_01x02 | PinHeader_1x02_P2.54mm_Vertical | J2 |
| 1 | 1207-P6.5MM XHXDZ(兴华鑫) | BUZ-TH_BD12.5-P6.50-D1.4 | BUZZER1 |
| 3 | SW_Push | SW_PUSH_6mm | SW1, SW2, SW3 |
| 1 | 1uF | C_0805_2012Metric | C1 |
| 2 | 4.7uF | C_0805_2012Metric | C2, C3 |
| 2 | 5.1K | R_0805_2012Metric | R1, R2 |
| 1 | 2K | R_0805_2012Metric | R3 |
| 3 | 10K | R_0805_2012Metric | R4, R5, R9 |
| 2 | 4.7K | R_0805_2012Metric | R6, R7 |
| 1 | LDR03 | R_LDR_10x8.5mm_P7.6mm_Vertical | R8 |
Pokegotchi---fallout-2026 design files
The KiCad project lives in the TrevorLee01/pokegotchi---fallout-2026 repository on GitHub; these links point at the commit this page was built from.
- LayoutPCB files/pokegotchi.kicad_pcb
- SchematicPCB files/pokegotchi.kicad_sch
Pokegotchi---fallout-2026: common questions
What microcontroller does the Pokegotchi---fallout-2026 use?
The Pokegotchi---fallout-2026 is built around the ESP32-S3-WROOM-1, from the ESP32 family.
How big is the Pokegotchi---fallout-2026 PCB?
The Pokegotchi---fallout-2026 measures 80 × 80 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Pokegotchi---fallout-2026?
23 components, from 16 distinct parts. The full bill of materials is listed on this page.
Where can I download the Pokegotchi---fallout-2026 design files?
From the TrevorLee01/pokegotchi---fallout-2026 repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Pokegotchi---fallout-2026 design in my own project?
The repository has no license, so all rights stay with TrevorLee01. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Pokegotchi---fallout-2026 without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k