TrlBoard
TrlRizu·TrlBoard
About the TrlBoard PCB
TrlBoard is an open source ESP32 PCB design by TrlRizu, published on GitHub. It is a 2-layer board measuring 56.5 × 27.9 mm, with 44 components from 27 distinct parts.
Its main chip is the ESP32-S3-WROOM-1, from the ESP32 family. Other key parts include the BQ24072RGTR, TPS63060DSCR and CH340C. By type, the board carries 16 capacitors, 14 resistors, 4 ICs, 4 connectors, 2 transistors and 2 diodes.
It belongs with the power & battery, dev boards & breakouts and sensors designs in this gallery.
From the project
ESP32-S3-Wroom1 based devboard
The board is manufactured through JLCPCB's PCBA though not complete as the ESP32-S3-WROOM-1 and header pins are going to be hand-soldered.
Note: I didn't find any 1x22 pin connectors so why not just purchase 1x30pin and then cut off the excess?
TRL-Board is a flexible devboard aimed to power personal robotic prototypes, with ideas such as: - Quadrupped Bot - Line-follower - Robotic Arm Mirrored control

Main components on the TrlBoard
TrlBoard bill of materials (BOM)
44 components, 27 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | BQ24072RGTR BQ24072RGT Texas Instruments | VQFN-16-1EP_3x3mm_P0.5mm_EP1.6x1.6mm | U1 |
| 1 | ESP32-S3-WROOM-1 | ESP32-S3-WROOM-1 | U2 |
| 1 | TPS63060DSCR TPS63060 Texas Instruments | Texas_S-PWSON-N10_ThermalVias | U3 |
| 1 | CH340C WCH(Jiangsu Qin Heng) | SOIC127P600X180-16N | U4 |
| 2 | SS8050-G Comchip | TRANS_SS8050-G | Q1, Q2 |
| 1 | B2B-XH-A_LF__SN_ JST | JST_B2B-XH-A_LF__SN_ | J1 |
| 2 | Conn_01x22 | PinHeader_1x22_P2.54mm_Vertical | J2, J4 |
| 1 | TYPE-C-31-M-12 USB_C_Receptacle_USB2.0_16P Korean Hroparts Elec | USB_C_Receptacle_HRO_TYPE-C-31-M-12 | J5 |
| 1 | ICM-42670-P | XDCR_ICM-42670-P | MT1 |
| 2 | KT-0603R LED Hubei KENTO Elec | LED_0402_1005Metric_Pad0.77x0.64mm_HandSolder | D1, D2 |
| 1 | MLZ1005M1R0WT000 1uH TDK | L_0402_1005Metric | L1 |
| 4 | CL05B104KO5NNNC 100nF Samsung Electro-Mechanics | C_0402_1005Metric | C1, C8, C14, C15 |
| 4 | CL10A226MQ8NRNC 22uF Samsung Electro-Mechanics | C_0603_1608Metric | C2, C9, C10, C11 |
| 1 | CL05A105KA5NQNC 1uF Samsung Electro-Mechanics | C_0402_1005Metric | C3 |
| 1 | CL05A475MP5NRNC 4.7uF Samsung Electro-Mechanics | C_0402_1005Metric | C4 |
| 2 | CL10A106KP8NNNC 10uF Samsung Electro-Mechanics | C_0603_1608Metric | C5, C6 |
| 1 | CL05C100JB5NNNC 10pF Samsung Electro-Mechanics | C_0402_1005Metric | C7 |
| 1 | CL10A475KO8NNNC 4.7uF Samsung Electro-Mechanics | C_0603_1608Metric | C12 |
| 1 | CL05B103KB5NNNC 10nF Samsung Electro-Mechanics | C_0402_1005Metric | C13 |
| 1 | CL05A225MQ5NSNC 2.2uF Samsung Electro-Mechanics | C_0402_1005Metric | C16 |
Show 7 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 620k | R_0402_1005Metric | R1 |
| 1 | 0603WAF1203T5E 110k UNI-ROYAL(Uniroyal Elec) | R_0402_1005Metric | R2 |
| 1 | 0603WAF1004T5E 1M UNI-ROYAL(Uniroyal Elec) | R_0603_1608Metric | R3 |
| 7 | 0402WGF1002TCE 10K UNI-ROYAL(Uniroyal Elec) | R_0402_1005Metric | R4, R9, R10, R11, R12, R13, R14 |
| 1 | 0402WGF1181TCE 1.18K UNI-ROYAL(Uniroyal Elec) | R_0402_1005Metric | R5 |
| 1 | 0402WGF1131TCE 1.13K UNI-ROYAL(Uniroyal Elec) | R_0402_1005Metric | R6 |
| 2 | 0402WGF1501TCE 1.5K UNI-ROYAL(Uniroyal Elec) | R_0402_1005Metric | R7, R8 |
TrlBoard design files
The KiCad project lives in the TrlRizu/TrlBoard repository on GitHub; these links point at the commit this page was built from.
- LayoutTrlBoard.kicad_pcb
- SchematicTrlBoard.kicad_sch
- BOMbom-JLCPCB-Assembly-Order.csv
TrlBoard: common questions
What microcontroller does the TrlBoard use?
The TrlBoard is built around the ESP32-S3-WROOM-1, from the ESP32 family.
How big is the TrlBoard PCB?
The TrlBoard measures 56.5 × 27.9 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the TrlBoard?
44 components, from 27 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the TrlBoard design files?
From the TrlRizu/TrlBoard repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the TrlBoard design in my own project?
The repository has no license, so all rights stay with TrlRizu. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the TrlBoard without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k