9 open source boards using the TPS63060DSCR

Real designs built with the TPS63060DSCR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

9 boardsClear filters|Most starred

How designs wire the TPS63060DSCR

Read from the KiCad layouts of 7 open source designs, one per repository: what each pin of the TPS63060DSCR connects to, and the resistors, capacitors and other passives placed on it.

  • The L1 pin has a inductor on 7 of 7 designs, most often 1 µH (then 1.5 µH).
  • The VIN pin has a decoupling capacitor on 7 of 7 designs, most often 10 µF (then 22 µF).
  • The VAUX pin has a capacitor to GND on 7 of 7 designs, most often 100 nF.
  • The FB pin has a resistor to GND on 7 of 7 designs, most often 100 kΩ (then 200 kΩ).
L1pin 1Connected to: Signal 100%
  • Inductor on 100% · 1 µH (3), 1.5 µH (3)
VINpin 2Connected to: VSYS 71% · a signal 29%
  • Decoupling capacitor on 100% · 10 µF (10), 22 µF (2), 100 nF (1)
PS/SYNCpin 4Connected to: GND 71%
PGpin 5Connected to: Signal 86%
  • Pull-up to 3.3V on 57% · 100 kΩ (2), 1 MΩ (2)
VAUXpin 6Connected to: Signal 100%
  • Capacitor to GND on 100% · 100 nF (7)
GNDpin 7Connected to: GND 100%
FBpin 8Connected to: Signal 100%
  • Resistor to GND on 100% · 100 kΩ (5), 200 kΩ (1), 110 kΩ (1)
  • Capacitor to GND on 71% · 10 pF (5)
  • Pull-up to 3.3V on 57% · 560 kΩ (2), 562 kΩ (1), 620 kΩ (1)
  • Series resistor on 43% · 560 kΩ (3)
VOUTpin 9Connected to: 3.3V 71% · a signal 29%
  • Decoupling capacitor on 71% · 22 µF (10), 10 µF (2), 100 nF (1)
L2pin 10Connected to: Signal 100%
  • Inductor on 100% · 1 µH (3), 1.5 µH (3)
PGNDpin 11Connected to: GND 100%

1 more pin varies from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include 1u panel by oresat, Esp32-drone fcu by burakbasdere, Aster2350 by Amronos and ArtNetNode Full by vili111111p.

The TPS63060DSCR in open source designs

The gallery holds 9 open source boards using the TPS63060DSCR from 7 GitHub repositories; a typical one measures about 80 × 67.2 mm and carries around 109 components.

67% use four copper layers or more, and 22% carry an open source license.

The most starred is 1u panel by oresat.

Parts used alongside the TPS63060DSCR

Microcontrollers on boards using the TPS63060DSCR

TPS63060DSCR: common questions

Where can I find a TPS63060DSCR reference design?

Each of the 9 boards on this page is a real design using the TPS63060DSCR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

How is the TPS63060DSCR L1 pin connected?

The L1 pin has a inductor on 7 of 7 designs, most often 1 µH (then 1.5 µH). Counted from the KiCad layouts of 7 open source designs using the TPS63060DSCR.

What decoupling capacitors do designs use on the TPS63060DSCR VIN pin?

The VIN pin has a decoupling capacitor on 7 of 7 designs, most often 10 µF (then 22 µF). Counted from the KiCad layouts of 7 open source designs using the TPS63060DSCR.

How is the TPS63060DSCR VAUX pin connected?

The VAUX pin has a capacitor to GND on 7 of 7 designs, most often 100 nF. Counted from the KiCad layouts of 7 open source designs using the TPS63060DSCR.

Which microcontrollers do boards using the TPS63060DSCR use?

Most are built on RP2040/RP2350 (3), STM32 (3) and ESP32 (2).

How big is a typical board using the TPS63060DSCR?

The median is 80 × 67.2 mm, and 33% are two-layer designs.

What is the most popular open source board using the TPS63060DSCR?

By GitHub stars, 1u panel by oresat, with 25 stars.

Can I simulate one of these boards using the TPS63060DSCR before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part