AirMidi
TTeuber·AirMidi·hardware/pcb/kicad/midi_receiver.kicad_pcb
About the AirMidi PCB
AirMidi is an open source ESP32 PCB design by TTeuber, published on GitHub under the MIT license. It is a 2-layer board measuring 72 × 46 mm, with 18 components from 16 distinct parts.
Its main chip is the C2913204, from the ESP32 family. Other key parts include the TP4057 charger, TPS63020 3V3 and 6N138. By type, the board carries 7 resistors, 4 ICs, 3 connectors, 2 switches, 1 LED and 1 diode.
It belongs with the iot & wireless, audio and power & battery designs in this gallery.
From the project
Wireless MIDI interface firmware for ESP32-C6/S3: TRS MIDI to BLE MIDI, Network MIDI 2.0, RTP-MIDI, USB MIDI and ESP-NOW. MIDI-CI builds the web UI's controls from the synth; signed OTA updates with rollback. C11 core with host tests, hardware-in-the-loop tests.
A 72 x 46 mm two-layer board for a Seeed XIAO ESP32-C6 or ESP32-S3, in an 80 x 52 x 27 mm 3D-printed box. The photo shows rev A, the board the firmware was developed and tested on; this folder is rev B, which fixes rev A's mistakes (see Revisions).
The schematic, board and enclosure are generated from code (a Python circuit description, a layout file and a build123d enclosure script) in a separate design workspace. The files here are that workspace's outputs, copied in by an export script: they are replaced on every export, so edit the design there, not here.

Main components on the AirMidi
AirMidi bill of materials (BOM)
18 components, 16 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | C2913204 XIAO ESP32S3 | XIAO_ESP32S3 | U1 |
| 1 | TP4057 charger | TP4057_Module | U2 |
| 1 | TPS63020 3V3 | TPS63020_Module | U3 |
| 1 | 6N138 | DIP-8_W7.62mm_Socket | U4 |
| 1 | C173752 BAT JST-PH | JST_PH_S2B-PH-K_1x02_P2.00mm_Horizontal | J1 |
| 1 | C16684 MIDI OUT | AUDIO-TH_PJ307C | J2 |
| 1 | C16684 MIDI IN | AUDIO-TH_PJ307C | J3 |
| 1 | C7431059 POWER | SW-TH_3P-P4.80_HX-SS12D10G6-WJ | SW1 |
| 1 | C2837523 USER | SW_PUSH_6mm_H13mm | SW2 |
| 1 | C52034646 STATUS | LED_D3.0mm | LED1 |
| 1 | 1N4148 | D_DO-35_SOD27_P7.62mm_Horizontal | D1 |
| 2 | 100k | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1, R2 |
| 1 | 10R | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R3 |
| 1 | 33R | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R4 |
| 2 | 1k | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R5, R7 |
| 1 | 220R | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R6 |
AirMidi design files
The KiCad project lives in the TTeuber/AirMidi repository on GitHub; these links point at the commit this page was built from.
AirMidi: common questions
What microcontroller does the AirMidi use?
The AirMidi is built around the C2913204, from the ESP32 family.
How big is the AirMidi PCB?
The AirMidi measures 72 × 46 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the AirMidi?
18 components, from 16 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the AirMidi design files?
From the TTeuber/AirMidi repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the AirMidi design in my own project?
Yes, under the terms of its MIT license, which TTeuber chose for the repository.
Can I test firmware for the AirMidi without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8k