2 open source boards using the TP4057 charger

Real designs built with the TP4057 charger, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

2 boardsClear filters|Most starred

The TP4057 charger in open source designs

The gallery holds 2 open source boards using the TP4057 charger from 2 GitHub repositories; a typical one measures about 72 × 46 mm and carries around 18 components.

100% are two-layer designs, the rest use four layers or more, and 100% carry an open source license.

The most starred is AirMidi firmware by cxandy.

Parts used alongside the TP4057 charger

Microcontrollers on boards using the TP4057 charger

What boards using the TP4057 charger are built for

TP4057 charger: common questions

Where can I find a TP4057 charger reference design?

Each of the 2 boards on this page is a real design using the TP4057 charger. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What parts are used alongside the TP4057 charger?

The 6N138, C2913204 and TPS63020 3V3 appear in the most repositories here.

Which microcontrollers do boards using the TP4057 charger use?

Most are built on ESP32 (2).

How big is a typical board using the TP4057 charger?

The median is 72 × 46 mm, and 100% are two-layer designs.

What is the most popular open source board using the TP4057 charger?

By GitHub stars, AirMidi firmware by cxandy, with 0 stars.

Can I simulate one of these boards using the TP4057 charger before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part