2 open source boards using the TPS63020 3V3

Real designs built with the TPS63020 3V3, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

2 boardsClear filters|Most starred

The TPS63020 3V3 in open source designs

The gallery holds 2 open source boards using the TPS63020 3V3 from 2 GitHub repositories; a typical one measures about 72 × 46 mm and carries around 18 components.

100% are two-layer designs, the rest use four layers or more, and 100% carry an open source license.

The most starred is AirMidi firmware by cxandy.

Parts used alongside the TPS63020 3V3

Microcontrollers on boards using the TPS63020 3V3

What boards using the TPS63020 3V3 are built for

TPS63020 3V3: common questions

Where can I find a TPS63020 3V3 reference design?

Each of the 2 boards on this page is a real design using the TPS63020 3V3. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What parts are used alongside the TPS63020 3V3?

The 6N138, C2913204 and TP4057 charger appear in the most repositories here.

Which microcontrollers do boards using the TPS63020 3V3 use?

Most are built on ESP32 (2).

How big is a typical board using the TPS63020 3V3?

The median is 72 × 46 mm, and 100% are two-layer designs.

What is the most popular open source board using the TPS63020 3V3?

By GitHub stars, AirMidi firmware by cxandy, with 0 stars.

Can I simulate one of these boards using the TPS63020 3V3 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part