StudyKeyChain
TutuThePerson·StudyKeyChain·Hardware/Kicad/Keychain.kicad_pcb
About the StudyKeyChain PCB
StudyKeyChain is an open source ESP32 PCB design by TutuThePerson, published on GitHub under the MIT license. It is a 2-layer board measuring 82.5 × 82 mm, with 49 components from 26 distinct parts.
Its main chip is the ESP32-S3-WROOM-1, from the ESP32 family. Other key parts include the ER_OLEDM0.91_1x-I2C, MAX98357A, TP4056-42-ESOP8, AP2112K-3.3 and TPL5111. By type, the board carries 18 resistors, 13 capacitors, 7 ICs, 4 switches, 2 connectors and 2 diodes.
It belongs with the audio, power & battery and keyboards designs in this gallery.
From the project
No clue. jk. I just finished 2 months of A-levels and being grinding those past papers for atleast half a year now; I realise it is really demoralising to be studying 3 in the morning alone - so this idea stemmed from those experiences. It's just a bit of fun really and isn't aim
No clue. jk. I just finished 2 months of A-levels and being grinding those past papers for atleast half a year now; I realise it is really demoralising to be studying 3 in the morning alone - so this idea stemmed from those experiences. It's just a bit of fun really and isn't aimed as a full replacement for regular discipline and proper revision but might provide that little push to keep studying while staying healthy. I didn't want a big, bulky solution so I thought it would be cool if I could fit it on a keychain, that I could hang on my bag as such. The StudyPal consists of a 2 layer PCB…

Main components on the StudyKeyChain
StudyKeyChain bill of materials (BOM)
49 components, 26 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ESP32-S3-WROOM-1 | ESP32-S3-WROOM-1 | U1 |
| 1 | ER_OLEDM0.91_1x-I2C | ER_OLEDM0.91_1x-I2C | U2 |
| 1 | MAX98357A | TQFN-16-1EP_3x3mm_P0.5mm_EP1.23x1.23mm | U3 |
| 1 | TP4056-42-ESOP8 | SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.41x3.3mm_ThermalVias | U5 |
| 1 | AP2112K-3.3 | SOT-23-5 | U6 |
| 1 | TPL5111 | SOT-23-6 | U7 |
| 1 | USBLC6-2SC6 | SOT-23-6 | U8 |
| 1 | PMOS | SOT-23-5 | Q1 |
| 1 | USB_C_Receptacle_USB2.0_16P | USB_C_Receptacle_Amphenol_124019772112A | J1 |
| 1 | Conn_01x02_Socket | JST_PH_S2B-PH-K_1x02_P2.00mm_Horizontal | J2 |
| 1 | Piezo | Buzzer_12x9.5RM7.6 | BZ1 |
| 1 | Speaker | PinSocket_1x02_P2.00mm_Vertical | LS1 |
| 1 | SW_Push | SW_Kailh_Choc_V1_1.00u | SW1 |
| 1 | RotaryEncoder_Switch | RotaryEncoder_Alps_EC11E-Switch_Vertical_H20mm | SW2 |
| 1 | FLASH_BUTTON | SW_PUSH_6mm | SW3 |
| 1 | RESET_BUTTON | SW_PUSH_6mm | SW4 |
| 2 | LED | LED_0603_1608Metric | D1, D2 |
| 6 | C10u | C_0402_1005Metric | C1, C2, C4, C5, C9, C13 |
| 6 | C100n | C_0402_1005Metric | C3, C6, C8, C10, C11, C12 |
| 1 | C1u | C_0402_1005Metric | C7 |
Show 6 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | R5.1k | R_0402_1005Metric | R1, R2 |
| 1 | R1.2k | R_0402_1005Metric | R3 |
| 2 | R1K | R_0402_1005Metric | R4, R5 |
| 7 | R10k | R_0402_1005Metric | R6, R8, R9, R10, R11, R17, R18 |
| 4 | R100k | R_0402_1005Metric | R7, R12, R13, R16 |
| 2 | R4.7k | R_0402_1005Metric | R14, R15 |
StudyKeyChain design files
The KiCad project lives in the TutuThePerson/StudyKeyChain repository on GitHub; these links point at the commit this page was built from.
StudyKeyChain: common questions
What microcontroller does the StudyKeyChain use?
The StudyKeyChain is built around the ESP32-S3-WROOM-1, from the ESP32 family.
How big is the StudyKeyChain PCB?
The StudyKeyChain measures 82.5 × 82 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the StudyKeyChain?
49 components, from 26 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the StudyKeyChain design files?
From the TutuThePerson/StudyKeyChain repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the StudyKeyChain design in my own project?
Yes, under the terms of its MIT license, which TutuThePerson chose for the repository.
Can I test firmware for the StudyKeyChain without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k