Main board

UMDBPP·bobot-2·Hardware/Tim/Main board/Main board.kicad_pcb

Main board layout, top view — open source RP2040/RP2350 board by UMDBPP

About the Main board

Main board is an open source RP2040/RP2350 PCB design by UMDBPP, published on GitHub. It is a 4-layer board measuring 121 × 66.5 mm, with 179 components from 49 distinct parts.

Its main chip is the RP2040, from the RP2040/RP2350 family. Other key parts include the W25Q64JVZP, MS5607-02BA, BMI270, ADP7105ACPZ-3.3-R7 and DRF1262TL. By type, the board carries 59 capacitors, 57 resistors, 18 connectors, 14 ICs, 10 test points and 5 diodes.

Main components on the Main board

RP2040W25Q64JVZPMS5607-02BABMI270ADP7105ACPZ-3.3-R7DRF1262TLMAX-M10SADP7105ACPZ-5.0-R7TPS2121RUXR

Main board bill of materials (BOM)

179 components, 49 distinct parts.

QtyPartRefs
2
RP2040
U1, U7
2
W25Q64JVZP
U2, U8
1
MS5607-02BA
U3
1
BMI270
U4
2
ADP7105ACPZ-3.3-R7
U5, U12
1
DRF1262TL
U6
1
MAX-M10S
U10
2
ADP7105ACPZ-5.0-R7
U11, U13
2
TPS2121RUXR
U14, U15
2
IRLML0060TRPBF
Q1, Q2
2
12MHz
Y1, Y2
2
USB_C_Receptacle_USB2.0
J2, J12
4
Conn_01x04_Socket
J3, J4, J5, J15
3
Conn_01x02_Socket
J6, J7, J13
1
U.FL
J8
2
Conn_01x03_Socket
J10, J18
3
Conn_01x02_Pin
J11, J14, J16
1
Conn_01x04_Pin
J17
2
Micro_SD_Card
J19, J20
1
03
0.3_Ohm_Resistor1
Show 29 more
QtyPartRefs
1
Antenna
AE1
4
KMR2
B1, B2, B3, B4
1
ML414H IV01E
BT1
1
SolderJumper_2_Bridged
JP2
2
SolderJumper_2_Open
JP3, JP4
1
LM1084-ADJ
LM1084-ADJ1
1
IRF540N
MOSFET2
10
TestPoint
TP1, TP2, TP3, TP4, TP5, TP6, TP7, TP8 +2
2
LED
D1, D4
2
USBLC6-2SC6
D2, D5
1
NSR0530HT1G
D3
4
10pF
C1, C2, C22, C23
28
100nF
C3, C4, C7, C8, C9, C10, C12, C13 +20
19
1uF
C5, C6, C19, C20, C26, C27, C37, C39 +11
4
10uF
C11, C21, C32, C57
4
1nF
C47, C48, C51, C52
5
1k
R1, R5, R12, R17, R21
8
10k
R2, R6, R10, R11, R18, R22, R44, R63
4
27
R3, R4, R19, R20
2
590
R7, R23
4
5.1k
R8, R9, R30, R31
4
0
R13, R14, R15, R16
12
100k
R32, R33, R34, R35, R36, R37, R38, R39 +4
2
63.4k
R45, R58
2
18.2k
R46, R55
8
5k
R47, R48, R50, R52, R54, R56, R60, R62
2
21.5k
R49, R57
2
23.7k
R51, R59
2
10.2k
R53, R61

Main board design files

The KiCad project lives in the UMDBPP/bobot-2 repository on GitHub; these links point at the commit this page was built from.

Main board: common questions

What microcontroller does the Main board use?

The Main board is built around the RP2040, from the RP2040/RP2350 family.

How big is the Main board?

The Main board measures 121 × 66.5 mm, has 4 copper layers and is 1.6 mm thick.

How many components are on the Main board?

179 components, from 49 distinct parts. The full bill of materials is listed on this page.

Where can I download the Main board design files?

From the UMDBPP/bobot-2 repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Main board design in my own project?

The repository has no license, so all rights stay with UMDBPP. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Main board without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.

More boards in bobot-2

Similar boards