2 open source boards using the DRF1262TL

Real designs built with the DRF1262TL, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

2 boardsClear filters|Most starred

The DRF1262TL in open source designs

The gallery holds 2 open source boards using the DRF1262TL from 2 GitHub repositories; a typical one measures about 83.3 × 45.8 mm and carries around 117 components.

100% use four copper layers or more, and 0% carry an open source license.

The most starred is Rudolph Tracker by UMDBPP.

Parts used alongside the DRF1262TL

Microcontrollers on boards using the DRF1262TL

What boards using the DRF1262TL are built for

DRF1262TL: common questions

Where can I find a DRF1262TL reference design?

Each of the 2 boards on this page is a real design using the DRF1262TL. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

Which microcontrollers do boards using the DRF1262TL use?

Most are built on RP2040/RP2350 (2).

How big is a typical board using the DRF1262TL?

The median is 83.3 × 45.8 mm, and 0% are two-layer designs.

What is the most popular open source board using the DRF1262TL?

By GitHub stars, Rudolph Tracker by UMDBPP, with 1 stars.

Can I simulate one of these boards using the DRF1262TL before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part