MainBoardV1Copie

Unimakers·CDR-2024-ELEC-ROBOT·MainBoardV1/MainBoardV1Copie.kicad_pcb

MainBoardV1Copie PCB layout, top view — open source ESP32 board by Unimakers

About the MainBoardV1Copie PCB

MainBoardV1Copie is an open source ESP32 PCB design by Unimakers, published on GitHub. It is a 2-layer board measuring 91.4 × 117.3 mm, with 28 components from 16 distinct parts.

Its main chip is the AMS1117-3.3, from the ESP32 family. Other key parts include the LM1117MP-3.3, TEN20-2411WIN and POLOLU_BREAKOUT_DRV8825. By type, the board carries 9 connectors, 8 capacitors, 4 switches, 3 ICs, 2 modules and 1 diode.

It belongs with the robotics & motion designs in this gallery.

Main components on the MainBoardV1Copie

MainBoardV1Copie bill of materials (BOM)

28 components, 16 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
AMS1117-3.3
ESP32-S3-WROOM-1
U1
1
LM1117MP-3.3
U3
1
TEN20-2411WIN
U4
2
POLOLU_BREAKOUT_DRV8825
Pololu_Breakout_DRV8825
A1, A2
1
CONN_01X02
USB_B_Micro
J1
5
CONN_01X04
Conn_01x04
J2, J4, J7, J8, J9
1
CONN_01X03
Conn_01x02
J3
1
CONN_01X05
Conn_01x05
J5
1
CONN_01X02
Conn_01x02
J6
1
SW_SPST
SW1
1
SW_SPDT
SW2
2
SW_DIP_X03
SW_DIP_x03
SW3, SW4
1
WS2812B
D2
6
C
C1, C2, C3, C4, C5, C6
2
C_Polarized
C7, C9
1
R
R2

MainBoardV1Copie design files

The KiCad project lives in the Unimakers/CDR-2024-ELEC-ROBOT repository on GitHub; these links point at the commit this page was built from.

MainBoardV1Copie: common questions

What microcontroller does the MainBoardV1Copie use?

The MainBoardV1Copie is built around the AMS1117-3.3, from the ESP32 family.

How big is the MainBoardV1Copie PCB?

The MainBoardV1Copie measures 91.4 × 117.3 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the MainBoardV1Copie?

28 components, from 16 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the MainBoardV1Copie design files?

From the Unimakers/CDR-2024-ELEC-ROBOT repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the MainBoardV1Copie design in my own project?

The repository has no license, so all rights stay with Unimakers. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the MainBoardV1Copie without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

More boards in CDR-2024-ELEC-ROBOT

Similar boards