TFTScreenESP32

Unimakers·CDR-2024-ELEC-ROBOT·TFTScreenESP32/TFTScreenESP32.kicad_pcb

TFTScreenESP32 PCB layout, top view — open source ESP32 board by Unimakers

About the TFTScreenESP32 PCB

TFTScreenESP32 is an open source ESP32 PCB design by Unimakers, published on GitHub. It is a 2-layer board measuring 63.5 × 83.6 mm, with 20 components from 13 distinct parts.

Its main chip is the AMS1117-3.3, from the ESP32 family. Other key parts include the ESP32-S3-DEVKITC. By type, the board carries 6 connectors, 6 capacitors, 3 switches, 3 resistors and 2 ICs.

It belongs with the robotics & motion designs in this gallery.

Main components on the TFTScreenESP32

TFTScreenESP32 bill of materials (BOM)

20 components, 13 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
AMS1117-3.3
ESP32-S3-WROOM-1
U1
1
ESP32-S3-DEVKITC
AP1117-33
U2
1
CONN_01X02
Conn_01x08
J1
1
CONN_01X04
Conn_01x06
J2
1
CONN_01X03
Conn_01x08
J3
1
CONN_01X04
Conn_01x10
J4
1
CONN_01X02
USB_B_Micro
J6
1
CONN_01X04
Conn_01x04
J7
1
SW_SPST
SW1
1
SW_DIP_x01
SW2
1
SW_DIP_X03
SW_SPST
SW3
6
C
C1, C2, C3, C4, C5, C6
3
R
R1, R2, R3

TFTScreenESP32 design files

The KiCad project lives in the Unimakers/CDR-2024-ELEC-ROBOT repository on GitHub; these links point at the commit this page was built from.

TFTScreenESP32: common questions

What microcontroller does the TFTScreenESP32 use?

The TFTScreenESP32 is built around the AMS1117-3.3, from the ESP32 family.

How big is the TFTScreenESP32 PCB?

The TFTScreenESP32 measures 63.5 × 83.6 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the TFTScreenESP32?

20 components, from 13 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the TFTScreenESP32 design files?

From the Unimakers/CDR-2024-ELEC-ROBOT repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the TFTScreenESP32 design in my own project?

The repository has no license, so all rights stay with Unimakers. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the TFTScreenESP32 without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

More boards in CDR-2024-ELEC-ROBOT

Similar boards