MainBoardV3.1FormB

Unimakers·CDR-2024-ELEC-ROBOT·MainBoardV3.1FormB/MainBoardV3.1FormB.kicad_pcb

MainBoardV3.1FormB PCB layout, top view — open source ESP32 board by Unimakers

About the MainBoardV3.1FormB PCB

MainBoardV3.1FormB is an open source ESP32 PCB design by Unimakers, published on GitHub. It is a 4-layer board measuring 120 × 120 mm, with 51 components from 26 distinct parts.

Its main chip is the ESP32-S3-DEVKITC, from the ESP32 family. Other key parts include the AMS1117-3.3, TSR_2-2433, TEN_50-2411WI, BNO085 and POLOLU_BREAKOUT_DRV8825. By type, the board carries 26 connectors, 6 ICs, 6 capacitors, 5 resistors, 3 modules and 3 diodes.

It belongs with the robotics & motion designs in this gallery.

Main components on the MainBoardV3.1FormB

MainBoardV3.1FormB bill of materials (BOM)

51 components, 26 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
AMS1117-3.3
TSR_2-2450
U1
1
ESP32-S3-DEVKITC
ESP32-S3-DevKitC
U2
1
TSR_2-2433
U3
1
TEN_50-2411WI
U4
1
~
U5
1
BNO085
U6
3
POLOLU_BREAKOUT_DRV8825
Pololu_Breakout_DRV8825
A1, A2, A3
2
CONN_01X02
Conn_01x02
J1, J11
3
CONN_01X04
Conn_01x04
J2, J4, J10
2
CONN_01X03
Conn_01x03
J3, J22
2
CONN_01X05
Conn_01x05
J5, J23
1
CONN_01X02
Conn_01x02
J6
3
CONN_01X04
Conn_01x04
J7, J8, J9
4
CONN_01X03
Conn_01x02
J12, J13, J14, J15
2
CONN_01X02
Conn_01x02
J16, J17
3
CONN_01X03
Conn_02x03_Odd_Even
J19, J20, J21
1
Conn_02x05_Odd_Even
J24
3
Conn_01x02
J25, J26, J27
1
Buzzer
BZ1
1
Conn_01x02
Tir.1
Show 6 more
QtyPartRefs
3
LED_Small
D1, D3, D4
2
C_Polarized
C1, C5
1
C_Polarized
C3
3
C_Polarized
C7, C8, C9
2
R
R1, R2
3
R_Small
R3, R4, R5

MainBoardV3.1FormB design files

The KiCad project lives in the Unimakers/CDR-2024-ELEC-ROBOT repository on GitHub; these links point at the commit this page was built from.

MainBoardV3.1FormB: common questions

What microcontroller does the MainBoardV3.1FormB use?

The MainBoardV3.1FormB is built around the ESP32-S3-DEVKITC, from the ESP32 family.

How big is the MainBoardV3.1FormB PCB?

The MainBoardV3.1FormB measures 120 × 120 mm, has 4 copper layers and is 1.6 mm thick.

How many components are on the MainBoardV3.1FormB?

51 components, from 26 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the MainBoardV3.1FormB design files?

From the Unimakers/CDR-2024-ELEC-ROBOT repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the MainBoardV3.1FormB design in my own project?

The repository has no license, so all rights stay with Unimakers. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the MainBoardV3.1FormB without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

More boards in CDR-2024-ELEC-ROBOT

Similar boards