MainBoardV3.2
Unimakers·CDR-2024-ELEC-ROBOT·MainBoardV3.2/MainBoardV3.2.kicad_pcb
About the MainBoardV3.2 PCB
MainBoardV3.2 is an open source ESP32 PCB design by Unimakers, published on GitHub. It is a 2-layer board measuring 83.7 × 100 mm, with 50 components from 25 distinct parts.
Its main chip is the ESP32-S3-DEVKITC, from the ESP32 family. Other key parts include the AMS1117-3.3, TSR_2-2433, TEN_50-2411WI and POLOLU_BREAKOUT_DRV8825. By type, the board carries 26 connectors, 6 capacitors, 5 ICs, 5 resistors, 3 modules and 3 diodes.
It belongs with the robotics & motion designs in this gallery, and the repository also holds 5 earlier revisions of it.
Main components on the MainBoardV3.2
MainBoardV3.2 bill of materials (BOM)
50 components, 25 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | AMS1117-3.3 TSR_2-2450 | Traco 2- 24xx | U1 |
| 1 | ESP32-S3-DEVKITC ESP32-S3-DevKitC | ESP32-S3-DevKitC | U2 |
| 1 | TSR_2-2433 | Traco 2- 24xx | U3 |
| 1 | TEN_50-2411WI | Traco TEN 50 series | U4 |
| 1 | ~ | PCA9685breakout | U5 |
| 3 | POLOLU_BREAKOUT_DRV8825 Pololu_Breakout_DRV8825 | Pololu_Breakout-16_15.2x20.3mm | A1, A2, A3 |
| 2 | CONN_01X02 Conn_01x02 | JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | J1, J11 |
| 3 | CONN_01X04 Conn_01x04 | Molex_KK-254_AE-6410-04A_1x04_P2.54mm_Vertical | J2, J4, J10 |
| 2 | CONN_01X03 Conn_01x03 | PinHeader_1x03_P2.54mm_Vertical | J3, J22 |
| 2 | CONN_01X05 Conn_01x05 | JST_XH_B5B-XH-A_1x05_P2.50mm_Vertical | J5, J23 |
| 1 | CONN_01X02 Conn_01x02 | AMASS_XT60-M_1x02_P7.20mm_Vertical | J6 |
| 3 | CONN_01X04 Conn_01x04 | JST_XH_B4B-XH-A_1x04_P2.50mm_Vertical | J7, J8, J9 |
| 4 | CONN_01X03 Conn_01x02 | Molex_KK-254_AE-6410-02A_1x02_P2.54mm_Vertical | J12, J13, J14, J15 |
| 2 | CONN_01X02 Conn_01x02 | Molex_KK-254_AE-6410-02A_1x02_P2.54mm_Vertical | J16, J17 |
| 3 | CONN_01X03 Conn_02x03_Odd_Even | PinHeader_2x03_P2.54mm_Vertical | J19, J20, J21 |
| 1 | Conn_02x05_Odd_Even | IDC-Header_2x05_P2.54mm_Vertical | J24 |
| 3 | Conn_01x02 | Molex_KK-254_AE-6410-02A_1x02_P2.54mm_Vertical | J25, J26, J27 |
| 1 | Buzzer | Buzzer_12x9.5RM7.6 | BZ1 |
| 1 | Conn_01x02 | JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | Tir.1 |
| 3 | LED_Small | LED_1206_3216Metric_Pad1.42x1.75mm_HandSolder | D1, D3, D4 |
Show 5 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | C_Polarized | CP_Elec_6.3x5.9 | C1, C5 |
| 1 | C_Polarized | CP_Elec_10x12.6 | C3 |
| 3 | C_Polarized | CP_Elec_6.3x4.9 | C7, C8, C9 |
| 2 | R | R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R1, R2 |
| 3 | R_Small | R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R3, R4, R5 |
MainBoardV3.2 design files
The KiCad project lives in the Unimakers/CDR-2024-ELEC-ROBOT repository on GitHub; these links point at the commit this page was built from.
MainBoardV3.2: common questions
What microcontroller does the MainBoardV3.2 use?
The MainBoardV3.2 is built around the ESP32-S3-DEVKITC, from the ESP32 family.
How big is the MainBoardV3.2 PCB?
The MainBoardV3.2 measures 83.7 × 100 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the MainBoardV3.2?
50 components, from 25 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the MainBoardV3.2 design files?
From the Unimakers/CDR-2024-ELEC-ROBOT repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the MainBoardV3.2 design in my own project?
The repository has no license, so all rights stay with Unimakers. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the MainBoardV3.2 without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
More boards in CDR-2024-ELEC-ROBOT
Earlier revisions in the repo: MainboardV3, MainBoardV3.1, MainBoardV2, MainBoardV1, MainBoard V4
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k