UniBoard-Xiao
Unimakers·xiao-mainboard·UniBoard-Xiao/UniBoard-Xiao.kicad_pcb
About the UniBoard-Xiao PCB
UniBoard-Xiao is an open source ESP32 PCB design by Unimakers, published on GitHub. It is a 2-layer board measuring 80 × 80 mm, with 36 components from 21 distinct parts.
Its main chip is the XIAO-ESP32-S3-DIP, from the ESP32 family. Other key parts include the TMC2209_SILENTSTEPSTICK, TSR1-2433E, TSR2-2450N and TSR1-2450E. By type, the board carries 14 connectors, 6 ICs, 6 resistors, 5 diodes, 2 switches and 2 capacitors.
Main components on the UniBoard-Xiao
UniBoard-Xiao bill of materials (BOM)
36 components, 21 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | XIAO-ESP32-S3-DIP | XIAO-ESP32S3-DIP | U1 |
| 2 | TMC2209_SILENTSTEPSTICK | MODULE_TMC2209_SILENTSTEPSTICK | U2, U3 |
| 1 | TSR1-2433E | Converter_DCDC_TRACO_TSR1-xxxxE_THT | U4 |
| 1 | TSR2-2450N | Converter_DCDC_TRACO_TSR2-24xxN_TSR2-24xxxN_THT | U5 |
| 1 | TSR1-2450E | Converter_DCDC_TRACO_TSR1-xxxxE_THT | U6 |
| 1 | tirette | Molex_KK-254_AE-6410-02A_1x02_P2.54mm_Vertical | J1 |
| 1 | BAU | Molex_KK-396_A-41791-0002_1x02_P3.96mm_Vertical | J3 |
| 1 | oled I2C | Molex_KK-254_AE-6410-04A_1x04_P2.54mm_Vertical | J4 |
| 1 | STEPPER D | Molex_KK-254_AE-6410-04A_1x04_P2.54mm_Vertical | J5 |
| 1 | STEPPER G | Molex_KK-254_AE-6410-04A_1x04_P2.54mm_Vertical | J6 |
| 3 | I2C Extension | Molex_KK-254_AE-6410-04A_1x04_P2.54mm_Vertical | J7, J9, J10 |
| 1 | con BAT | AMASS_XT60-M_1x02_P7.20mm_Vertical | J8 |
| 1 | LIDAR | JST_XH_B5B-XH-A_1x05_P2.50mm_Vertical | J11 |
| 3 | 5vp | AMASS_XT30U-F_1x02_P5.0mm_Vertical | J12, J13, J14 |
| 1 | ultrasonic sensor | Molex_KK-254_AE-6410-04A_1x04_P2.54mm_Vertical | J15 |
| 1 | TEN_50-2411 | TEN50_TRP | PS1 |
| 2 | SW_DIP_x02 | SW_DIP_SPSTx02_Slide_9.78x7.26mm_W7.62mm_P2.54mm | SW1, SW2 |
| 1 | D_Schottky | D_A-405_P10.16mm_Horizontal | D1 |
| 4 | LED_Small | LED_1206_3216Metric | D2, D3, D4, D5 |
| 2 | 100µF | CP_Radial_D10.0mm_P5.00mm | C1, C2 |
Show 1 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 6 | 1k | R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R2, R3, R4, R5, R6, R7 |
UniBoard-Xiao design files
The KiCad project lives in the Unimakers/xiao-mainboard repository on GitHub; these links point at the commit this page was built from.
UniBoard-Xiao: common questions
What microcontroller does the UniBoard-Xiao use?
The UniBoard-Xiao is built around the XIAO-ESP32-S3-DIP, from the ESP32 family.
How big is the UniBoard-Xiao PCB?
The UniBoard-Xiao measures 80 × 80 mm, has 2 copper layers and is 1.579 mm thick.
How many components are on the UniBoard-Xiao?
36 components, from 21 distinct parts. The full bill of materials is listed on this page.
Where can I download the UniBoard-Xiao design files?
From the Unimakers/xiao-mainboard repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the UniBoard-Xiao design in my own project?
The repository has no license, so all rights stay with Unimakers. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the UniBoard-Xiao without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
More boards in xiao-mainboard
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k