TOLv2
UpsidedownFalcon·TOLv2·electronics/TOLv2.kicad_pcb
About the TOLv2 PCB
TOLv2 is an open source Nordic nRF PCB design by UpsidedownFalcon, published on GitHub under the MIT license. It is a 6-layer board measuring 26.5 × 17.8 mm, with 72 components from 37 distinct parts.
Its main chip is the NRF52840-QIAA-R, from the Nordic nRF family. Other key parts include the BQ25180YBGR, MAX17048G+T10, TPS7A0230PDBVR, ICM-45686 and MMC5983MA. By type, the board carries 33 capacitors, 18 resistors, 7 ICs, 5 inductors, 2 crystals and 2 connectors.
It belongs with the sensors, iot & wireless and wearables designs in this gallery.
From the project
Open Source Wearable IMU Logger
- Introduction - Rationale - System overview - Level 1: system context - Level 2: modules - System breakdown - USBC: connector and protection - BMS: charger, fuel gauge and cell - SNS: sensors and main rail - MCU: SoC, clocks and radio - SD: card and card rail - UI: button, LED and debug - PCB - JLCPCB ordering - Firmware rules - F1: charger - F2: storage - F3: sensors - F4: clock - F5: card - F6: GPIO and buses - F7: timing and sleep - F8: recovery - Rails - IMU
Main components on the TOLv2
TOLv2 bill of materials (BOM)
72 components, 37 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | NRF52840-QIAA-R Nordic Semiconductor | MCU_NRF52840-QIAA-R | U1 |
| 1 | BQ25180YBGR Texas Instruments | CHG_BQ25180YBGR | U2 |
| 1 | MAX17048G+T10 Analog Devices (Maxim) | FG_MAX17048G-T10 | U3 |
| 2 | TPS7A0230PDBVR Texas Instruments | LDO_3V0_TPS7A0230PDBVR | U4, U7 |
| 1 | ICM-45686 TDK InvenSense | IMU_ICM-45686 | U5 |
| 1 | MMC5983MA MEMSIC | MAG_MMC5983MA | U6 |
| 1 | NX2016SA-32M-EXS00A-CS06465 32MHz NDK | XTAL_32MHz_2016_NX2016SA-32M-EXS00A-CS06465 | X1 |
| 1 | TG-3541CE 32.7680KXA3 Seiko Epson | TCXO_32k768_TG-3541CE | Y1 |
| 1 | TYPE-C 16P CB1.6 073 SHOU HAN | CONN_USBC16_TYPE-C-16P-CB1p6-073 | J1 |
| 1 | TF-110 XUNPU | CONN_MICROSD_TF-110 | J2 |
| 1 | RFANT3216120A5T Walsin | ANT_RFANT3216120A5T | ANT1 |
| 1 | NCP15XH103F03RC 10k Murata | NTC_10k_0402_NCP15XH103F03RC | RT1 |
| 1 | TS-1088-AR02016 XUNPU | SW_TS-1088-AR02016 | SW1 |
| 1 | AOZ8904CIL Alpha & Omega Semiconductor | ESD_AOZ8904CIL | D1 |
| 1 | WS2812B-2020-V6 Worldsemi | LED_WS2812B-2020-V6 | D2 |
| 1 | VHF100505HQ4N7BT 4.7nH FH (Fenghua) | IND_4n7_0402_VHF100505HQ4N7BT | L1 |
| 1 | MYH1608N100MT 10uH MYX | IND_10uH_0603_MYH1608N100MT | L2 |
| 1 | VHF100505H15NKT 15nH FH (Fenghua) | IND_15nH_0402_VHF100505H15NKT | L3 |
| 1 | TCGL1005B2N2BAT 2.2nH CCTC | IND_2n2_0402_TCGL1005B2N2BAT | L5 |
| 1 | TCGL1005B6N8JAT 6.8nH CCTC | IND_6n8_0402_TCGL1005B6N8JAT | L6 |
Show 17 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | CC0402GRNPO9BN160 16pF YAGEO | CAP_16pF_50V_NP0_0402_CC0402GRNPO9BN160 | C1, C2 |
| 1 | CC0402BRNPO9BN1R0 1pF YAGEO | CAP_1pF_50V_NP0_0402_CC0402BRNPO9BN1R0 | C3 |
| 1 | 0402CG1R2B500NT 1.2pF FH (Fenghua) | CAP_1p2_50V_C0G_0402_0402CG1R2B500NT | C4 |
| 10 | CL05B104KO5NNNC 100nF Samsung Electro-Mechanics | CAP_100nF_16V_X7R_0402_CL05B104KO5NNNC | C5, C7, C8, C12, C23, C33, C36, C37 +2 |
| 7 | CL05A105KA5NQNC 1uF Samsung Electro-Mechanics | CAP_1uF_25V_X5R_0402_CL05A105KA5NQNC | C6, C14, C15, C34, C35, C38, C46 |
| 1 | 0402CG821J500NT 820pF FH (Fenghua) | CAP_820pF_50V_C0G_0402_0402CG821J500NT | C9 |
| 1 | 0402CG101J500NT 100pF FH (Fenghua) | CAP_100pF_50V_C0G_0402_0402CG101J500NT | C11 |
| 1 | TCC0402X7R473K250AT 47nF CCTC | CAP_47nF_25V_X7R_0402_TCC0402X7R473K250AT | C16 |
| 5 | CL10A475KO8NNNC 4.7uF Samsung Electro-Mechanics | CAP_4u7_16V_X5R_0603_CL10A475KO8NNNC | C20, C21, C30, C32, C47 |
| 3 | CL10A106MA8NRNC 10uF Samsung Electro-Mechanics | CAP_10uF_25V_X5R_0603_CL10A106MA8NRNC | C31, C39, C43 |
| 1 | CL05A106MQ5NUNC 10uF Samsung Electro-Mechanics | CAP_10uF_6V3_X5R_0402_CL05A106MQ5NUNC | C40 |
| 1 | 0402WGF1000TCE 100R UNI-ROYAL | RES_100R_0402_0402WGF1000TCE | R1 |
| 3 | 0402WGF5101TCE 5.1k UNI-ROYAL | RES_5k1_0402_0402WGF5101TCE | R2, R3, R4 |
| 1 | SCR0402F2R2 2.2R VO | RES_2R2_0402_SCR0402F2R2 | R5 |
| 11 | 0402WGF1002TCE 10k UNI-ROYAL | RES_10k_0402_0402WGF1002TCE | R6, R7, R9, R12, R13, R14, R15, R16 +3 |
| 1 | 0402WGF1004TCE 1M UNI-ROYAL | RES_1M_0402_0402WGF1004TCE | R20 |
| 1 | 0402WGF1001TCE 1k UNI-ROYAL | RES_1k_0402_0402WGF1001TCE | R24 |
TOLv2 design files
The KiCad project lives in the UpsidedownFalcon/TOLv2 repository on GitHub; these links point at the commit this page was built from.
TOLv2: common questions
What microcontroller does the TOLv2 use?
The TOLv2 is built around the NRF52840-QIAA-R, from the Nordic nRF family.
How big is the TOLv2 PCB?
The TOLv2 measures 26.5 × 17.8 mm, has 6 copper layers and is 0.86448 mm thick.
How many components are on the TOLv2?
72 components, from 37 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the TOLv2 design files?
From the UpsidedownFalcon/TOLv2 repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the TOLv2 design in my own project?
Yes, under the terms of its MIT license, which UpsidedownFalcon chose for the repository.
Can I test firmware for the TOLv2 without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug Nordic nRF firmware against it before you order a PCB.
Similar boards
Nordic nRF
Keyboard
byrantech
262.5 × 109.6 mm206 parts2LMIT4.3kNordic nRF
TOTEM
GEIGEIGEIST
258.8 × 94.4 mm85 parts2LCERN-OHL-P-2.02.0kNordic nRF
Pixl.js
solosky
40 × 23 mm45 parts4LGPL-2.01.4kNordic nRF
Management
dennisss
101 × 31.5 mm50 parts2LApache-2.0381Nordic nRF
Board
dennisss
363 × 128 mm420 parts4LApache-2.0381Nordic nRF
Board hl15-latest
dennisss
61 × 37 mm14 parts2LApache-2.0381