SmartCableTester
uxabix·SmartCableTester·Schematics/KiCad Schematics/Universal Cable Tester.kicad_sch

About the SmartCableTester PCB
SmartCableTester is an open source PCB design by uxabix, published on GitHub under the MIT license. It is a board, with 166 components from 22 distinct parts.
Other key parts include the 74HC595, NE555P, TP4056 and MT3608_Module. By type, the board carries 74 resistors, 46 diodes, 32 transistors, 6 ICs, 4 connectors and 2 capacitors.
It belongs with the power & battery designs in this gallery.
From the project
A modular device designed to test electrical cables. It supports testing of both short cables (both ends accessible) and long cables (with ends far apart). The device visually indicates conductor continuity using LEDs.
The device tests cable continuity by sending signals from the Driver block to the cable conductors. LEDs in the Indicator block show which conductors are functional. For long cables, the system can be split into a remote unit and main unit to connect each end independently.
You can simulate the circuit using Falstad Circuit Simulator: 1. Open https://falstad.com/circuit/circuitjs.html 2. File -> Import From Text... 3. Paste the contents of Schematics/FalStad Scheme.txt 4. Run the simulation
Main components on the SmartCableTester
SmartCableTester bill of materials (BOM)
166 components, 22 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | 74HC595 | U1, U3 | |
| 1 | NE555P | DIP-8_W7.62mm | U2 |
| 1 | TP4056 | U4 | |
| 2 | MT3608_Module | U5, U6 | |
| 16 | 2N3904 | TO-92_Inline | Q1, Q4, Q5, Q8, Q9, Q12, Q13, Q16 +8 |
| 8 | BC557 | TO-92_Inline | Q2, Q6, Q10, Q14, Q18, Q22, Q26, Q30 |
| 8 | BC547 | TO-92_Inline | Q3, Q7, Q11, Q15, Q19, Q23, Q27, Q31 |
| 2 | RJ45 | J1, J2 | |
| 2 | USB_C_Receptacle | USB-C_16 | J3, J5 |
| 1 | Battery_Cell | BT1 | |
| 1 | Push_Button | SW_PUSH_6mm | SW1 |
| 30 | LED | LED_0603_1608Metric | D1, D3, D5, D7, D9, D11, D13, D15 +22 |
| 16 | D | D2, D4, D6, D8, D10, D12, D14, D16 +8 | |
| 1 | 10nF | C1 | |
| 1 | 1uF | C2 | |
| 2 | 470k | R1, R2 | |
| 16 | 100k | R3, R6, R9, R12, R15, R18, R21, R24 +8 | |
| 24 | 4k7 | R4, R5, R7, R10, R11, R13, R16, R17 +16 | |
| 8 | 68k | R8, R14, R20, R26, R32, R38, R44, R50 | |
| 16 | 680R | R51, R52, R53, R54, R55, R56, R57, R58 +8 |
Show 2 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 10k | R67 | |
| 7 | 220R | R68, R69, R70, R71, R72, R73, R74 |
SmartCableTester design files
The KiCad project lives in the uxabix/SmartCableTester repository on GitHub; these links point at the commit this page was built from.
SmartCableTester: common questions
How many components are on the SmartCableTester?
166 components, from 22 distinct parts. The full bill of materials is listed on this page.
Where can I download the SmartCableTester design files?
From the uxabix/SmartCableTester repository on GitHub, which has the schematic; the links under Design files point to each one.
Can I use the SmartCableTester design in my own project?
Yes, under the terms of its MIT license, which uxabix chose for the repository.
Similar boards
EinkPDA screen
TalismanDesign
95 × 54 mm27 parts2LApache-2.02.0kStack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7kDisplay Carrier
AxxAxx
35.6 × 58.2 mm5 parts2LGPL-3.01.7kProgrammingAdapter
stuartpittaway
10.5 × 83 mm3 parts2LCC-BY-NC-4.01.1kTemperaturePCB PANEL
stuartpittaway
116 × 75.5 mm178 parts2LCC-BY-NC-4.01.1kModule 16S PassiveBalanceAddOn
stuartpittaway
61 × 74 mm86 parts2LCC-BY-NC-4.01.1k