6 open source boards using the MT3608_Module

Real designs built with the MT3608_Module, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

6 boardsClear filters|Most starred

The MT3608_Module in open source designs

The gallery holds 6 open source boards using the MT3608_Module from 5 GitHub repositories; a typical one measures about 100 × 80 mm and carries around 30 components.

100% are two-layer designs, the rest use four layers or more, and 33% carry an open source license.

The most starred is USB Flash/EPROM Programmer by robsonsmartins.

Parts used alongside the MT3608_Module

Microcontrollers on boards using the MT3608_Module

MT3608_Module: common questions

Where can I find a MT3608_Module reference design?

Each of the 6 boards on this page is a real design using the MT3608_Module. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

Which microcontrollers do boards using the MT3608_Module use?

Most are built on RP2040/RP2350 (3) and ESP32 (1).

How big is a typical board using the MT3608_Module?

The median is 100 × 80 mm, and 100% are two-layer designs.

What is the most popular open source board using the MT3608_Module?

By GitHub stars, USB Flash/EPROM Programmer by robsonsmartins, with 35 stars.

Can I simulate one of these boards using the MT3608_Module before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part