MSPM0G3507-Development-Board
Varsha123-glitch·MSPM0G3507-Development-Board
About the MSPM0G3507-Development-Board
MSPM0G3507-Development-Board is an open source PCB design by Varsha123-glitch, published on GitHub. It is a 2-layer board measuring 56.6 × 27.6 mm, with 29 components from 13 distinct parts.
Other key parts include the SPX3819M5-L-3-3, LIS2DH, MSPM0G3507SPTR and CH340E. By type, the board carries 14 capacitors, 8 resistors, 4 ICs, 1 crystal, 1 connector and 1 diode.
It belongs with the sensors, dev boards & breakouts and usb & debug tools designs in this gallery.
From the project
Custom 2-layer MSPM0G3507 development board designed in KiCad 9 with USB Type-C, CH340E USB-UART, SWD programming interface, and LIS2DH accelerometer.
This project is a custom development board based on the Texas Instruments MSPM0G3507 microcontroller.
The board was designed as a learning platform to gain practical experience in:
- Schematic capture - PCB layout and routing - Component selection - USB interface design - Power supply design - Embedded hardware development
During the design process, TI reference designs, component datasheets, and PCB design tutorials were used to understand and implement the hardware.

Main components on the MSPM0G3507-Development-Board
MSPM0G3507-Development-Board bill of materials (BOM)
29 components, 13 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | SPX3819M5-L-3-3 | SOT-23-5 | U1 |
| 1 | LIS2DH | LGA-14_2x2mm_P0.35mm_LayoutBorder3x4y | U2 |
| 1 | MSPM0G3507SPTR | LQFP-48_7x7mm_P0.5mm | U3 |
| 1 | CH340E | MSOP-10_3x3mm_P0.5mm | U4 |
| 1 | 8MHz | Crystal_SMD_2520-4Pin_2.5x2.0mm | X1 |
| 1 | USB_C_Receptacle_USB2.0_16P | USB_C_Receptacle_GCT_USB4105-xx-A_16P_TopMnt_Horizontal | J1 |
| 1 | USBLC6-2SC6 | SOT-23-6 | D1 |
| 9 | 470n | C_0805_2012Metric | C1, C2, C4, C6, C7, C10, C12, C13 +1 |
| 3 | 10u | C_0805_2012Metric | C3, C5, C11 |
| 2 | 15p | C_0805_2012Metric | C8, C9 |
| 2 | 0R | R_0805_2012Metric | R1, R5 |
| 5 | 5k1 | R_0805_2012Metric | R2, R3, R6, R8, R9 |
| 1 | 100k | R_0805_2012Metric | R4 |
MSPM0G3507-Development-Board design files
The KiCad project lives in the Varsha123-glitch/MSPM0G3507-Development-Board repository on GitHub; these links point at the commit this page was built from.
- LayoutMSPMO_PROJECt.kicad_pcb
- SchematicMSPMO_PROJECt.kicad_sch
MSPM0G3507-Development-Board: common questions
How big is the MSPM0G3507-Development-Board?
The MSPM0G3507-Development-Board measures 56.6 × 27.6 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the MSPM0G3507-Development-Board?
29 components, from 13 distinct parts. The full bill of materials is listed on this page.
Where can I download the MSPM0G3507-Development-Board design files?
From the Varsha123-glitch/MSPM0G3507-Development-Board repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the MSPM0G3507-Development-Board design in my own project?
The repository has no license, so all rights stay with Varsha123-glitch. Use it as a reference, and ask the author before reusing the design.
Similar boards
Sensor smd
scottbez1
40 × 20 mm5 parts2LApache-2.04.2kSensors
StuckAtPrototype
15.2 × 9 mm14 parts4LApache-2.03.8kMicrophone
Mentra-Community
5.5 × 6.1 mm6 parts2LMIT1.2kBreakout 60pin EEC-IV
rusefi
139.7 × 62.2 mm15 parts2LGPL-3.01.2k88 Pin Vag Breakout
rusefi
142 × 58 mm91 parts2LGPL-3.01.2kEecv breakout
rusefi
140.8 × 53.7 mm9 parts4LGPL-3.01.2k