10 open source boards using the MSPM0G3507SPTR
Real designs built with the MSPM0G3507SPTR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
CircuitDesign
lovengirl
170 × 230 mm233 parts2LNo license0Mspm0-microcontroller
cashmoneyisaac
54 × 27 mm32 parts2LNo license0MSPM0-USB-Development-Board
bassammorsy
53 × 28 mm29 parts2LNo license0TI-MSPM0
marwantm
60 × 34 mm29 parts2LNo license0Mspmo baord
prashantbhandary
53 × 28 mm29 parts2LNo license0MSPM0G3507-Development-Board
Varsha123-glitch
56.6 × 27.6 mm29 parts2LNo license0Kicad refresher
mpiima1
53.5 × 28.5 mm29 parts2LNo license0Mspm0g3507-evm
Naveens-Lab
56 × 34.3 mm29 parts2LNo license0TI-MSP-KICAD9-TUTORIAL
Monacrylic
55 × 25 mm29 parts2LNo license2X-TI-MSP-Devboard
Monacrylic
55 × 25 mm29 parts2LNo license2
How designs wire the MSPM0G3507SPTR
Read from the KiCad layouts of 9 open source designs, one per repository: what each pin of the MSPM0G3507SPTR connects to, and the resistors, capacitors and other passives placed on it.
- The NRST pin has a pull-up to 3.3V on 9 of 9 designs, most often 5.1 kΩ (then 47 kΩ).
- The NRST pin has a capacitor to GND on 9 of 9 designs, most often 470 nF (then 10 nF).
- The PA2/ROSC pin has a resistor to GND on 9 of 9 designs, most often 100 kΩ.
- The VCORE_48 pin has a decoupling capacitor on 9 of 9 designs, most often 470 nF (then 420 nF).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| PA28pin 3 | Connected to: Not connected 100% | — |
| NRSTpin 4 | Connected to: A connector 100% |
|
| PA31/CLK_OUTpin 5 | Connected to: Not connected 100% | — |
| VDDpin 6 | Connected to: 3.3V 100% |
|
| VSSpin 7 | Connected to: GND 100% | — |
| PA2/ROSCpin 8 | Connected to: Signal 100% |
|
| PA3/COMP1_OUT/LFXINpin 9 | Connected to: Not connected 89% | — |
| PA4/LFCLK_IN/LFXOUTpin 10 | Connected to: Not connected 89% | — |
| PA5/HFXIN/FCC_INpin 11 | Connected to: Signal 100% |
|
| PA6/HFCLK_IN/HFXOUTpin 12 | Connected to: Signal 100% |
|
| PA7/CLK_OUTpin 13 | Connected to: Not connected 89% | — |
| PB2pin 14 | Connected to: Not connected 78% · a signal 22% | — |
| PB3pin 15 | Connected to: Not connected 78% · a signal 22% | — |
| PA10/CLK_OUTpin 18 | Connected to: LIS2DH 56%, a connector 22% |
|
| PA11pin 19 | Connected to: LIS2DH 56%, a connector 22% |
|
| PB6pin 20 | Connected to: Not connected 89% | — |
| PB7pin 21 | Connected to: Not connected 89% | — |
| PB14pin 24 | Connected to: Not connected 89% | — |
| PB15pin 25 | Connected to: Not connected 100% | — |
| PB16pin 26 | Connected to: Not connected 100% | — |
| PA12/FCC_INpin 27 | Connected to: Not connected 89% | — |
| PA13pin 28 | Connected to: Not connected 100% | — |
| PA14/CLK_OUT/A0_12pin 29 | Connected to: Not connected 89% | — |
| PA15/A1_0pin 30 | Connected to: Not connected 89% | — |
| PA16/A1_1/FCC_INpin 31 | Connected to: Not connected 100% | — |
| PA17/A1_2pin 32 | Connected to: Not connected 100% | — |
| PA18/A1_3pin 33 | Connected to: Not connected 100% | — |
| PB17/A1_4pin 36 | Connected to: Not connected 89% | — |
| PB18/A1_5pin 37 | Connected to: Not connected 89% | — |
| PB19/A1_6pin 38 | Connected to: Not connected 89% | — |
| PA21/A1_7/VREF-pin 39 | Connected to: Signal 89% |
|
| PA22/CLK_OUT/A0_7pin 40 | Connected to: Not connected 100% | — |
| PB20/A0_6pin 41 | Connected to: Not connected 100% | — |
| PB24/A0_5pin 42 | Connected to: Not connected 100% | — |
| PA23/VREF+pin 43 | Connected to: Signal 89% |
|
| PA24/A0_3pin 44 | Connected to: Not connected 100% | — |
| PA25/A0_2/OPA0_IN1+pin 45 | Connected to: Not connected 100% | — |
| PA26/A0_1pin 46 | Connected to: Not connected 100% | — |
| PA27/RTC_OUT/A0_0pin 47 | Connected to: Not connected 89% | — |
| VCORE_48pin 48 | Connected to: 1.35V 89% |
|
8 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include TI-MSP-KICAD9-TUTORIAL by Monacrylic, MSPM0-USB-Development-Board by bassammorsy, Mspm0-microcontroller pcb by cashmoneyisaac and CircuitDesign by lovengirl.
The MSPM0G3507SPTR in open source designs
The gallery holds 10 open source boards using the MSPM0G3507SPTR from 9 GitHub repositories; a typical one measures about 55 × 28 mm and carries around 29 components.
100% are two-layer designs, the rest use four layers or more, and 0% carry an open source license.
The most starred is X-TI-MSP-Devboard by Monacrylic.
Parts used alongside the MSPM0G3507SPTR
What boards using the MSPM0G3507SPTR are built for
MSPM0G3507SPTR: common questions
Where can I find a MSPM0G3507SPTR reference design?
Each of the 10 boards on this page is a real design using the MSPM0G3507SPTR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What pull-up resistor is used on the MSPM0G3507SPTR NRST pin?
The NRST pin has a pull-up to 3.3V on 9 of 9 designs, most often 5.1 kΩ (then 47 kΩ). Counted from the KiCad layouts of 9 open source designs using the MSPM0G3507SPTR.
What resistor goes on the MSPM0G3507SPTR PA2/ROSC pin?
The PA2/ROSC pin has a resistor to GND on 9 of 9 designs, most often 100 kΩ. Counted from the KiCad layouts of 9 open source designs using the MSPM0G3507SPTR.
What decoupling capacitors do designs use on the MSPM0G3507SPTR VCORE_48 pin?
The VCORE_48 pin has a decoupling capacitor on 9 of 9 designs, most often 470 nF (then 420 nF). Counted from the KiCad layouts of 9 open source designs using the MSPM0G3507SPTR.
What parts are used alongside the MSPM0G3507SPTR?
The CH340E, SPX3819M5-L-3-3, LIS2DH and USBLC6-2SC6 appear in the most repositories here.
How big is a typical board using the MSPM0G3507SPTR?
The median is 55 × 28 mm, and 100% are two-layer designs.
What is the most popular open source board using the MSPM0G3507SPTR?
By GitHub stars, X-TI-MSP-Devboard by Monacrylic, with 2 stars.
Can I simulate one of these boards using the MSPM0G3507SPTR before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.