HardLabs

F8-fc h7 rev

victorhook·f8-fc·kicad/f8-fc-h7_rev-a/f8-fc-h7_rev.kicad_pcb

F8-fc h7 rev PCB layout, top view — open source ESP32 board by victorhook

About the F8-fc h7 rev PCB

F8-fc h7 rev is an open source ESP32 PCB design by victorhook, published on GitHub. It is a 4-layer board measuring 40.5 × 49 mm, with 103 components from 44 distinct parts.

Its main chip is the ESP32-C3-MINI-1U-N4, from the ESP32 family. Other key parts include the BMP388, LMR33630AQRNXRQ1, GT-USB-7010AN, ICM-42688-P and STM32H743VIT6. By type, the board carries 47 capacitors, 22 resistors, 10 connectors, 9 ICs, 6 diodes and 3 transistors.

It belongs with the robotics & motion designs in this gallery.

From the project

f8 fc is a fully open source AIO flight controller with 8 motor drives

f8 fc is a fully open source AIO flight controller that is made primarily for small drones with brushed drones. It features: - STM32F405 microcontroller with 1MB flash - BMI270 imu - BMP388 barometer - Onboard 16MB external flash for data logging - Status LEDs - 1-4s input voltage - 4 available UARTs - 8 brushed motor drives with 6A mosfets - Voltage & current sensing - Runs ardupilot

F8-fc h7 rev, from the project README
From the project README

Main components on the F8-fc h7 rev

BMP388ESP32-C3-MINI-1U-N4LMR33630AQRNXRQ1GT-USB-7010ANICM-42688-PSTM32H743VIT6SIT1050TK

F8-fc h7 rev bill of materials (BOM)

103 components, 44 distinct parts.

QtyPartRefs
1
BMP388
U2
1
ESP32-C3-MINI-1U-N4
U3
3
LMR33630AQRNXRQ1
U4, U6, U8
1
GT-USB-7010AN
U5
1
ICM-42688-P
U7
1
STM32H743VIT6
U9
1
SIT1050TK
U10
1
PMOS
Q1
2
WST4041
Q2, Q4
1
16 MHz
Y2
2
FC-ESC con
J1, J12
1
USART1
J10
1
USART2
J11
1
UART4
J14
1
USART6
J15
3
I2C
J16, J17, J18
1
Debug
J19
1
TF PUSH
Card1
1
SW_SPST
SW1
1
RED
D1
Show 24 more
QtyPartRefs
1
BLUE
D2
1
GREEN
D3
1
D_Schottky
D4
2
D_Schottky
D5, D7
3
6.8uH
L1, L2, L3
6
10uF
C1, C2, C32, C33, C40, C41
2
10uF
C3, C11
17
0.1uF
C4, C5, C6, C7, C9, C10, C17, C21 +9
1
4.7uF
C8
2
15pF
C18, C23
1
10nF
C19
3
2.2uF
C20, C49, C51
6
220nF
C24, C27, C34, C35, C42, C43
3
1uF
C28, C36, C44
6
22uF
C30, C31, C38, C39, C46, C47
3
100k
R1, R14, R16
7
10k
R2, R3, R11, R13, R20, R22, R23
4
1k
R4, R5, R6, R18
2
5.11k
R9, R10
1
12.5K
R12
1
24.9k
R15
1
43.5k
R17
2
2.2k
R24, R25
1
120R
R26

F8-fc h7 rev design files

The KiCad project lives in the victorhook/f8-fc repository on GitHub; these links point at the commit this page was built from.

F8-fc h7 rev: common questions

What microcontroller does the F8-fc h7 rev use?

The F8-fc h7 rev is built around the ESP32-C3-MINI-1U-N4, from the ESP32 family.

How big is the F8-fc h7 rev PCB?

The F8-fc h7 rev measures 40.5 × 49 mm, has 4 copper layers and is 1.6 mm thick.

How many components are on the F8-fc h7 rev?

103 components, from 44 distinct parts. The full bill of materials is listed on this page.

Where can I download the F8-fc h7 rev design files?

From the victorhook/f8-fc repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the F8-fc h7 rev design in my own project?

The repository has no license, so all rights stay with victorhook. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the F8-fc h7 rev without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

More boards in f8-fc

Similar boards