ESP32-Environmental-Monitoring
vishalbodkhe·ESP32-Environmental-Monitoring-PCB
About the ESP32-Environmental-Monitoring PCB
ESP32-Environmental-Monitoring is an open source ESP32 PCB design by vishalbodkhe, published on GitHub. It is a 2-layer board measuring 100 × 90.5 mm, with 19 components from 14 distinct parts.
Its main chip is the ESP32-WROOM-32, from the ESP32 family. Other key parts include the AMS1117-3.3, DHT11 and ER_OLEDM0.91_1x-I2C. By type, the board carries 6 resistors, 4 ICs, 4 capacitors, 2 connectors, 2 switches and 1 diode.
It belongs with the displays & leds, iot & wireless and sensors designs in this gallery.
From the project
ESP32-based environmental monitoring PCB designed in KiCad with DHT11, LDR, OLED, custom routing, GND zone and manufacturing-ready Gerber files.
A custom 2-layer PCB designed in KiCad for an ESP32-based environmental monitoring system.
- ESP32-WROOM-32 - DHT11 temperature and humidity sensor - OLED I2C display - LDR light sensor - 5V USB power input - AMS1117-3.3V regulation - Reset and Boot buttons - Power LED - 4 × M3 mounting holes - GND copper zone - Custom PCB routing - DRC verified - Manufacturing-ready Gerber and drill files

Main components on the ESP32-Environmental-Monitoring
ESP32-Environmental-Monitoring bill of materials (BOM)
19 components, 14 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ESP32-WROOM-32 | ESP32-WROOM-32 | U1 |
| 1 | AMS1117-3.3 | SOT-223-3_TabPin2 | U2 |
| 1 | DHT11 | Aosong_DHT11_5.5x12.0_P2.54mm | U3 |
| 1 | ER_OLEDM0.91_1x-I2C | ER_OLEDM0.91_1x-I2C | U4 |
| 1 | USB_B_Micro | USB_Micro-B_Molex-105017-0001 | J1 |
| 1 | Screw_Terminal_01x02 | PinHeader_1x02_P2.54mm_Vertical | J2 |
| 1 | RESET | SW_PUSH_6mm | SW1 |
| 1 | BOOT | SW_PUSH_6mm | SW2 |
| 1 | LED | LED_D5.0mm | D1 |
| 2 | 10uF | C_0805_2012Metric | C1, C2 |
| 2 | 100nF | C_0805_2012Metric | C3, C4 |
| 4 | 10k | R_0805_2012Metric | R1, R2, R5, R6 |
| 1 | 1K | R_0805_2012Metric | R3 |
| 1 | LDR03 | R_LDR_10x8.5mm_P7.6mm_Vertical | R4 |
ESP32-Environmental-Monitoring design files
The KiCad project lives in the vishalbodkhe/ESP32-Environmental-Monitoring-PCB repository on GitHub; these links point at the commit this page was built from.
- Layoutp5.kicad_pcb
- Schematicp5.kicad_sch
ESP32-Environmental-Monitoring: common questions
What microcontroller does the ESP32-Environmental-Monitoring use?
The ESP32-Environmental-Monitoring is built around the ESP32-WROOM-32, from the ESP32 family.
How big is the ESP32-Environmental-Monitoring PCB?
The ESP32-Environmental-Monitoring measures 100 × 90.5 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the ESP32-Environmental-Monitoring?
19 components, from 14 distinct parts. The full bill of materials is listed on this page.
Where can I download the ESP32-Environmental-Monitoring design files?
From the vishalbodkhe/ESP32-Environmental-Monitoring-PCB repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the ESP32-Environmental-Monitoring design in my own project?
The repository has no license, so all rights stay with vishalbodkhe. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the ESP32-Environmental-Monitoring without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k