ESP32-Smart-Temperature-Fan-Controller
vishalbodkhe·ESP32-Smart-Temperature-Fan-Controller
About the ESP32-Smart-Temperature-Fan-Controller PCB
ESP32-Smart-Temperature-Fan-Controller is an open source ESP32 PCB design by vishalbodkhe, published on GitHub. It is a 2-layer board measuring 124.3 × 65 mm, with 26 components from 17 distinct parts.
Its main chip is the ESP32-WROOM-32, from the ESP32 family. Other key parts include the DHT11, ER_OLEDM0.91_1x-I2C and AMS1117-3.3. By type, the board carries 8 resistors, 6 capacitors, 4 ICs, 3 connectors, 2 switches and 2 diodes.
It belongs with the sensors and displays & leds designs in this gallery.
From the project
KiCad PCB design of an ESP32 based smart temperature and fan controller.
ESP32 based Smart Temperature and Fan Controller PCB designed using KiCad.
The system uses a DHT11 sensor for temperature monitoring and controls a 12V DC fan using a MOSFET. An OLED display is used to display temperature information.
- ESP32-WROOM-32 - DHT11 Temperature Sensor - 0.91-inch I2C OLED - AMS1117-3.3V - NMOS - SS14 Diode - 12V DC Fan - LED - Push Buttons

Main components on the ESP32-Smart-Temperature-Fan-Controller
ESP32-Smart-Temperature-Fan-Controller bill of materials (BOM)
26 components, 17 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ESP32-WROOM-32 | ESP32-WROOM-32 | U1 |
| 1 | DHT11 | Aosong_DHT11_5.5x12.0_P2.54mm | U2 |
| 1 | ER_OLEDM0.91_1x-I2C | ER_OLEDM0.91_1x-I2C | U3 |
| 1 | AMS1117-3.3 | SOT-223-3_TabPin2 | U4 |
| 1 | Q_NMOS_GDS | SOT-23 | Q1 |
| 1 | Conn_01x02_Pin | PinHeader_1x02_P2.54mm_Vertical | J1 |
| 1 | Conn_01x02_Socket | PinHeader_1x02_P2.54mm_Vertical | J2 |
| 1 | Conn_01x04_Pin | PinHeader_1x04_P2.54mm_Vertical | J3 |
| 2 | SW_Push | SW_PUSH_6mm | SW1, SW2 |
| 1 | LED | LED_D5.0mm | D1 |
| 1 | SS14 | D_SMA | D2 |
| 3 | 10uF | C_1206_3216Metric | C2, C4, C7 |
| 3 | 100nF | C_0805_2012Metric | C3, C5, C6 |
| 4 | 10k | R_0805_2012Metric | R1, R5, R7, R8 |
| 2 | 4.7k | R_0805_2012Metric | R2, R3 |
| 1 | R | R_0805_2012Metric | R4 |
| 1 | 1k | R_0805_2012Metric | R6 |
ESP32-Smart-Temperature-Fan-Controller design files
The KiCad project lives in the vishalbodkhe/ESP32-Smart-Temperature-Fan-Controller repository on GitHub; these links point at the commit this page was built from.
- Layoutp7.kicad_pcb
- Schematicp7.kicad_sch
ESP32-Smart-Temperature-Fan-Controller: common questions
What microcontroller does the ESP32-Smart-Temperature-Fan-Controller use?
The ESP32-Smart-Temperature-Fan-Controller is built around the ESP32-WROOM-32, from the ESP32 family.
How big is the ESP32-Smart-Temperature-Fan-Controller PCB?
The ESP32-Smart-Temperature-Fan-Controller measures 124.3 × 65 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the ESP32-Smart-Temperature-Fan-Controller?
26 components, from 17 distinct parts. The full bill of materials is listed on this page.
Where can I download the ESP32-Smart-Temperature-Fan-Controller design files?
From the vishalbodkhe/ESP32-Smart-Temperature-Fan-Controller repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the ESP32-Smart-Temperature-Fan-Controller design in my own project?
The repository has no license, so all rights stay with vishalbodkhe. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the ESP32-Smart-Temperature-Fan-Controller without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k