12 open source boards using the TM1637
Real designs built with the TM1637, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
ESP32
ESP32S3 Audio Cam POE
jharvey
109.4 × 129.7 mm320 parts4LMIT1AVR/Arduino
Homegreen-Node
pmalessa
97 × 23.7 mm67 parts2LNo license1AVR/Arduino
Central panel
bitsandpixels-io
78.7 × 74.9 mm30 parts2LMIT1ESP32
Pr clock
tobycm
100 × 70 mm14 parts2LMIT1Pcb tm1637-0.80 led display module
cfrankb
90 × 40 mm12 parts2LNo license1036INCH 5DIGIT
galopago
43.8 × 21 mm10 parts2LMIT1AVR/Arduino
Dmx panel controller
akornsys-rdi
80 × 80 mm99 parts2LCC-BY-SA-4.00AVR/Arduino
Amper
Threadnaught
80 × 99 mm54 parts2LGPL-3.00AVR/Arduino
Bitclock
dimka-rs
61 × 61 mm11 parts2LGPL-3.00056INCH 3DIGIT
galopago
43.8 × 21 mm10 parts2LMIT1RP2040/RP2350
Timer
waiteu-git
80 × 80 mm35 parts2LNo license0ESP32S3 Audio Cam POE Smaller
jharvey
97.5 × 45.7 mm36 parts2LMIT1
How designs wire the TM1637
Read from the KiCad layouts of 10 open source designs, one per repository: what each pin of the TM1637 connects to, and the resistors, capacitors and other passives placed on it.
- The K1 pin is left unconnected on 7 of 10 designs (a signal on 3).
- The K2 pin is left unconnected on 7 of 10 designs (a signal on 3).
- The DIO pin has a pull-up to 5V on 5 of 10 designs, most often 10 kΩ.
- The CLK pin has a pull-up to 5V on 5 of 10 designs, most often 10 kΩ.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| GNDpin 1 | Connected to: GND 80% · a signal 20% | — |
| VDDpin 16 | Connected to: 5V 70% · a signal 30% |
|
| DIOpin 17 | Connected to: The microcontroller 60%, a connector 40% |
|
| CLKpin 18 | Connected to: The microcontroller 60%, a connector 40% |
|
| K1pin 19 | Connected to: Not connected 70% · a signal 30% | — |
| K2pin 20 | Connected to: Not connected 70% · a signal 30% | — |
14 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Central panel by bitsandpixels-io, Pcb tm1637-0.80 led display module by cfrankb, 036INCH 5DIGIT by galopago and ESP32S3 Audio Cam POE by jharvey.
The TM1637 in open source designs
The gallery holds 12 open source boards using the TM1637 from 10 GitHub repositories; a typical one measures about 80 × 65.5 mm and carries around 33 components.
92% are two-layer designs, the rest use four layers or more, and 75% carry an open source license.
The most starred is ESP32S3 Audio Cam POE by jharvey.
Microcontrollers on boards using the TM1637
What boards using the TM1637 are built for
TM1637: common questions
Where can I find a TM1637 reference design?
Each of the 12 boards on this page is a real design using the TM1637. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the TM1637 K1 pin connected?
The K1 pin is left unconnected on 7 of 10 designs (a signal on 3). Counted from the KiCad layouts of 10 open source designs using the TM1637.
How is the TM1637 K2 pin connected?
The K2 pin is left unconnected on 7 of 10 designs (a signal on 3). Counted from the KiCad layouts of 10 open source designs using the TM1637.
What pull-up resistor is used on the TM1637 DIO pin?
The DIO pin has a pull-up to 5V on 5 of 10 designs, most often 10 kΩ. Counted from the KiCad layouts of 10 open source designs using the TM1637.
Which microcontrollers do boards using the TM1637 use?
Most are built on AVR/Arduino (5), ESP32 (2) and RP2040/RP2350 (1).
How big is a typical board using the TM1637?
The median is 80 × 65.5 mm, and 92% are two-layer designs.
What is the most popular open source board using the TM1637?
By GitHub stars, ESP32S3 Audio Cam POE by jharvey, with 1 stars.
Can I simulate one of these boards using the TM1637 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.