BlueSlime-C3
wb1016·BlueSlime-C3·LSM6DSR/BlueSlime-C3.kicad_pcb
About the BlueSlime-C3 PCB
BlueSlime-C3 is an open source ESP32 PCB design by wb1016, published on GitHub under the MIT license. It is a 2-layer board measuring 30 × 30.1 mm, with 48 components from 27 distinct parts.
Its main chip is the ESP32-C3-MINI-1-H4, from the ESP32 family. Other key parts include the SRV05-4, TP4057, ME6217C33M5G, LSM6DSRTR and LIS2MDL. By type, the board carries 17 resistors, 15 capacitors, 6 ICs, 3 switches, 3 LEDs and 1 transistor.
From the project
custom SlimeVR tracker PCBA using ESP32-C3 and enclosure 3D model files.
Main components on the BlueSlime-C3
BlueSlime-C3 bill of materials (BOM)
48 components, 27 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ESP32-C3-MINI-1-H4 | ESP32C3MINI1H4 | IC1 |
| 1 | SRV05-4 | SOT-23-6 | U1 |
| 1 | TP4057 | SOT-23-6_L2.9-W1.6-P0.95-LS2.8-BL | U2 |
| 1 | ME6217C33M5G | SOT-23-5_L3.0-W1.7-P0.95-LS2.8-BR | U3 |
| 1 | LSM6DSRTR | LGA-14L_2P5X3X0P83_STM | U4 |
| 1 | LIS2MDL | LGA-12_2x2mm_P0.5mm | U5 |
| 1 | AO3401A | SOT-23 | Q1 |
| 1 | Conn_01x02_MountingPin | Molex_PicoBlade_53261-0271_1x02-1MP_P1.25mm_Horizontal | J1 |
| 2 | TS-1088-AR02016 | SW-SMD_L3.9-W3.0-P4.45 | SW1, SW2 |
| 1 | K3-1280S-L1 | SW-SMD_K3-1280S-L1 | SW3 |
| 1 | KH-TYPE-C-16P | USB-C-SMD_KH-TYPE-C-16P | USB1 |
| 1 | NCD0603B1 | LED_0603_1608Metric | LED1 |
| 1 | NCD0603G1 | LED_0603_1608Metric | LED2 |
| 1 | NCD0603R1 | LED_0603_1608Metric | LED3 |
| 1 | 1N5819WS | D_SOD-323 | D1 |
| 6 | 10u | C_0603_1608Metric | C1, C7, C8, C9, C10, C13 |
| 6 | 100n | C_0402_1005Metric | C2, C3, C4, C11, C12, C14 |
| 1 | 4.7u | C_0603_1608Metric | C5 |
| 1 | 1u | C_0603_1608Metric | C6 |
| 1 | 220n | C_0402_1005Metric | C15 |
Show 7 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 4 | 4.7k | R_0402_1005Metric | R1, R2, R16, R17 |
| 6 | 10k | R_0402_1005Metric | R3, R4, R5, R6, R14, R15 |
| 2 | 1k | R_0402_1005Metric | R7, R13 |
| 1 | 1M | R_0402_1005Metric | R8 |
| 2 | 5.1k | R_0402_1005Metric | R9, R10 |
| 1 | 180k | R_0402_1005Metric | R11 |
| 1 | 1.6k | R_0402_1005Metric | R12 |
BlueSlime-C3 design files
The KiCad project lives in the wb1016/BlueSlime-C3 repository on GitHub; these links point at the commit this page was built from.
- LayoutLSM6DSR/BlueSlime-C3.kicad_pcb
- SchematicLSM6DSR/BlueSlime-C3.kicad_sch
BlueSlime-C3: common questions
What microcontroller does the BlueSlime-C3 use?
The BlueSlime-C3 is built around the ESP32-C3-MINI-1-H4, from the ESP32 family.
How big is the BlueSlime-C3 PCB?
The BlueSlime-C3 measures 30 × 30.1 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the BlueSlime-C3?
48 components, from 27 distinct parts. The full bill of materials is listed on this page.
Where can I download the BlueSlime-C3 design files?
From the wb1016/BlueSlime-C3 repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the BlueSlime-C3 design in my own project?
Yes, under the terms of its MIT license, which wb1016 chose for the repository.
Can I test firmware for the BlueSlime-C3 without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k